Quote Originally Posted by Richb View Post
I managed to get 1/2 hour looking at the 260 this morning. I made up an ABS extension lead using a spare connector and a length of twin cable. First I connected the 260 loom onto a known good sensor on my ZTT and it made no difference, suggesting that its the loom side in that's the issue. Just to double check I swapped the extension over and connected my ZTT loom to the OSF sensor on the 260 and the ZTT ABS light went out as expected suggesting it passed the start up test and confirmed the sensor is not the immediate issue.

So what should I check next? Replacement ABS ECU? Are they the same as other models? I know someone has played with the wiring before as I can see where the loom has been spliced into where it connects into the ABS hydraulic unit. Does anyone have a schematic of the ABS system?

Cheers,
Rich
Here you go:-
ewd_260_04MY_EN.pdferl260.pdf