there is a guide to claying in the detailing section as a sticky
there is a guide to claying in the detailing section as a sticky
Peter Essling
Here
https://www.two-sixties.co.uk/mgoc26...ead.php?t=4723
I followed this the first time I clayed mine - the difference in the car was astounding
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end
Also use R222, and have found it to be excellent.
After claying, I also use P21S, which is a paint cleanser(made by same people as the R222) before applying the R222.
Don`t count the days, make each day count.
Vin 159. X-Power Grey, LPG converted (now sold:ash)
Criteria for my cars - the numbers of cylinders must be more than the number of seats:D
I find 1 gallon of elbow grease works wonders......
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
Did that last week and ended up with an 18 inch strach on the bonnet
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
Guess a similar question to OP...
I found some old Mer Ultimate polish in the garage so decided to give that a go after giving the car a clean yesterday. Seemed to reduced marks and surface scratches very nicely. I didnt bother use any wax after though as from the description on the bottle it seem liked it was sort of a wax anyway. claims to protect and whatnot. Mer dont seem to have any wax on the web site too, just the polish...
hmm... Guess it wouldnt have hurt to put some merguirs gold on top... but to be honest i had spent the best part of 5 hours cleaning the thing so applying another layer and buffing off wasnt high on my priority list! haha
Still havent clayed... but found that light pressure with a finger nail while polishing removed most noticeable stuck on debris.
Ian
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end