Misfire when warm
Results 1 to 10 of 15

Thread: Misfire when warm

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User
    Join Date
    Jun 2019
    Posts
    22

    Default

    Thanks David,I have joined as a full member i messaged Tim a few weeks ago and yes this site is superb,bit of a strange one the car,went out the other night it was around 15 degrees and the car ran perfectly then last night it was above 20 degrees and it miss firing again
    Who's the best garage to service our cars? Its previously been to Austin garages in shropshire with the previous owner

  2. #2
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    5,966

    Default

    Quote Originally Posted by Trower36 View Post
    Thanks David,I have joined as a full member i messaged Tim a few weeks ago and yes this site is superb,bit of a strange one the car,went out the other night it was around 15 degrees and the car ran perfectly then last night it was above 20 degrees and it miss firing again
    Who's the best garage to service our cars? Its previously been to Austin garages in shropshire with the previous owner
    I use Austin Garages too, even though I live in Holland, at least for anything major or needing experience with the 260s (actually near Burton-on-Trent in Staffordshire, not Shropshire). Excellent service and price, in my opinion, but often difficult to get an appointment.

    Regular small service (oil, filter, brake pads etc) should be no problem for a good non-260-specialist garage though. Emphasis on 'good', as always! If you can, and I have managed to, try and get a garage to accept that you always provide the parts and materials. They may baulk at that, since most make a lot of dosh on supplying inferior Chinese stuff at dealer prices! Makes sure I get top quality 5w20 oil, K&N filters and the Pagid pads I prefer.

    Was there any coolant under the COP in the spark plug tube, incidentally?

    David
    Last edited by David; 04-07-2019 at 12:32 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •