Have a look at the exhaust as they seem to stick out a bit too much for the saloon.Originally Posted by rawy
Also check the rear shocks as they looked a bit grubby in the pictures.
Other than that:-
- Subframe
- Heater hose/valve operation
- Condition of rear brakes/discs
- Rear springs
Hope it works out OK......
Fear keeps you alive. Fearless gets you killed
Herman
Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)
FJ1200, DynoJet Stage 1, K&N filter
Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
They look like tourer exhausts from the photos and the N/S one has dropped a considerable amount. The rear shock, as Herman says, would bear some closer examination and something strange going on with the scuttle panel clips.
Hope it all works out Graham.
Nich.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
Slightly worried now! :-(
Exhausts as long as they sound good I don't mind, probably need a tweak to line them up.
Not sure what grubby shocks would suggest, oil leak?
The scuttle panel does look interesting, didn't spot that...
Rawy
Where in Cornwall is it?
If I am free I can come down with you.
It's only metal, plastic and rubber. As long as the body is sound and it does not have any unwanted sounds.
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
Thanks Andy
I've PM'd you
Thanks
Graham
No need to get worried, just informed.
Forewarned is forearmed
Might help the deal...
Fear keeps you alive. Fearless gets you killed
Herman
Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)
FJ1200, DynoJet Stage 1, K&N filter
Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
Didn't mean to worry you Graham but as Herman says "forewarned is forearmed." Most things are sortable.
Nich.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
Herman/Nich, Graham has had a Email transcript of the "Buyers Guide" as for some reason he can't access it. (That is the second person this week)
MG ZT/ZT-T and Rover 75 V8 Buyers Guide I can log out and still see it.
Last edited by AndyG; 26-02-2015 at 10:59 PM.
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
It's in the Public Section Andy.
Nich.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
Rawy, did you have the Cornwall car?
Posting Permissions
Reply With Quote
