You are correct that there is no category for the 260/R75 V8 on the Rimmers website but they have the discs listed under the R75/ZT section. They are the correct size for our cars 325mm dia.
Screenshot 2023-06-12 184038.jpg
Screenshot 2023-06-12 184212.jpg
Nich.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
Those are MGR numbers that Nich gave you. Essentially the front discs and calipers are the same as the ZT 190 (and the BMW 330 actually), but since the calipers are mounted trailing on the V8's, you use the ZT 190 left caliper on the right of the car for the ZT 260 and the ZT 190 right caliper on the left.
Rover 75 V8 and MG ZT 260 are the same.
David
Last edited by David; 12-06-2023 at 08:31 PM.
Sorry mate since emigrating to Holland 50 years ago, I have trouble remembering what n/s and o/s is!
Is "nsf" left ? Think so?
A right hand ZT 190 caliper will fit the left hand side of your 260, and vice versa
Maybe better to use terms like "LH" and "RH". Much easier, and importantly that is how MGR designated all the bits!
David.
Last edited by David; 13-06-2023 at 07:10 PM.
Sorry David, wrongly i am only thinking in terms of RHD cars. You are correct ,for me N/s/f is the left side of the car for a RHD car. So i would have to order a right hand caliper to fit the left side.