1999 2.5 V6 Rover 75 Connoisseur - Dealer Launch - LHD
2004 4.6 V8 MG ZT-T (the only known auto ZT-T V8) - LHD
1993 2.7 V6 Rover 827 Coupé - LHD
1993 Rover 216 GSi
1975 Rover P6 3500
I purchased another Mk.IV with English as one of the languages in its firmware, so I have no direct need anymore.
Swallowed my pride and mentally "wrote off" the Euro 75 I had paid for the original Italian/French/German one (now I know why it was cheap!) and it is still sitting on my 'spares-shelf'.
I had already purchased a Resler USB interface cable to hack into the K-Bus too, but chickened out in case I really screwed things up! Also, although I downloaded Navcoder and found an English .LNG language file to download, you had said back in June '20:
... and that I did not have, so the Resler interface is also now sitting next to the Mk IV on the 'spares-shelf' !"it will ask for the firmware CD for the satnav language change, and you can't use BMW ones on a Rover unit, you need the specific Rover CD.".
David
Last edited by David; 08-09-2022 at 12:17 PM.
Appreciate that, Nicolas, but I was referring to the language change process using a Resler cable and Navcoder. You said then that " ... it will ask for the firmware CD for the satnav language change, and you can't use BMW ones on a Rover unit, you need the specific Rover CD.".
I infer from that, that the CD asked for is not the same as the BMW V.32 (copied) CD I used simply to update my (English language) Mk.IV firmware level for running 2019 maps DVDs therefore?
David
Last edited by David; 11-09-2022 at 12:38 PM.
1999 2.5 V6 Rover 75 Connoisseur - Dealer Launch - LHD
2004 4.6 V8 MG ZT-T (the only known auto ZT-T V8) - LHD
1993 2.7 V6 Rover 827 Coupé - LHD
1993 Rover 216 GSi
1975 Rover P6 3500