Quote Originally Posted by 6KH View Post
I have a TYG000250 in front of me. It's M10 x 1.5 x 50mm with a threaded portion of 40mm and a full diameter of 7mm. The flanged bolt head suits an E12 socket.

Unfortunately a DIN 912 socket head capscrew M10 x 50 12.9 has a threaded portion of 32mm. You can buy these quite readily. You'd have to get an M10 x 1.5 (standard M10 pitch) die to extend the thread if you wanted to replicate the original.

Regards

Andrew
AAAhh so! Another bit of wrong information to send me down a path with no hope. I didn't dare take out another bolt from my car to check the spec and so relied on the forum which had a post in another thread stating it was pitch 2. Most bolts in the automotive trade are 1.5 for drive-line (BMW, JLR, Vauxhall). I will now search for a 1.5 x 50mm.

Thanks for that Andrew, the information is more reassuring.

Kev