Part number for the output shaft seal is correct. Rimmers have 22 in stock
I'd check the output shaft as well as mentioned before.
Air filters in this thread, as well as the K&N of course
https://www.two-sixties.co.uk/mgoc26...ive-Airfilters
Part number for the output shaft seal is correct. Rimmers have 22 in stock
I'd check the output shaft as well as mentioned before.
Air filters in this thread, as well as the K&N of course
https://www.two-sixties.co.uk/mgoc26...ive-Airfilters
Fear keeps you alive. Fearless gets you killed
Herman
Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)
FJ1200, DynoJet Stage 1, K&N filter
Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
@Herman: is LUF000090 or TBX000140 correct at Rimmer's or should I order both?
http://www.rimmerbros.co.uk/Item--i-LUF000090
http://www.rimmerbros.co.uk/Item--i-TBX000140
And I can find the Output shaft adapter at SMC shop on ebay, any ideas?
Thanks
Marcus
Last edited by schoppa; 10-05-2013 at 05:48 PM.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
Yes, the oil come out between the propshaft (driveshaft) and the gearbox output. That's what the German Rover garage told me on the phone. But they were not sure about the part numbers.
Is it a good idea to order the output shaft adapter too and to change both TBX000140 seal and the the output shaft adapter? Btw found the adapter:
http://www.ebay.co.uk/itm/Rover-75-V...item19d5ad1794
Ciao
Marcus
Last edited by schoppa; 10-05-2013 at 06:00 PM.
For that price I'd get one from Rimmers http://www.rimmerbros.co.uk/Item--i-TVY000030
£30 vs £72
Fear keeps you alive. Fearless gets you killed
Herman
Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)
FJ1200, DynoJet Stage 1, K&N filter
Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.