hi guys ive bought a 5 ltr svr 32 valve to go into the lhd dtm shell i bought from tony bubble,ive got the engine wiring loom but need an mg svr ecu,
any suggestions or thoughts would be really appreciated
jimmie biggam
hi guys ive bought a 5 ltr svr 32 valve to go into the lhd dtm shell i bought from tony bubble,ive got the engine wiring loom but need an mg svr ecu,
any suggestions or thoughts would be really appreciated
jimmie biggam
GT Racing Or Will Riley are probably the best bets, or may be even Brian (Scooter)
I bought a spare ECU from Will Riley when I got my Roush engine from him. He said it would be OK for my set-up with a remap. I checked it at the time and I'm sure it was listed as for the 32v engine. I'll have a look tomorrow and will let you know as it is still in my garage unused.
Dave Rushfirth
Empty garage where #138 used to be
retread ,thats great news,looking forward to hear from you
jimmie biggam
Sorry Jimmie but I've just had a look at the code on the ECU and it is for the 4.6 4V engine and not the 5.0 4V unit.
Dave Rushfirth
Empty garage where #138 used to be
retread ,thanks for your reply,wouldnt the 4.6 32v ecu be fine as its a 4.6 engine reworked to a 5litre,it still says x power 4.6 ltr on the engine badge,im sure it would be fine with a remap ?
look forward for your reply, jimmie biggam
You have PM
Dave Rushfirth
Empty garage where #138 used to be
5 litre is usually a 4.6 with 3.7 bore or 3.75 crank
and the firing sequence is different