I have a complete dismantled ZT 260 engine that had done 22k. Engine has one bent con rod, yes bent!
All engine parts available, crank, 7 rods and pistons block, heads clutch, flywheel etc etc.
Contact me if you need any parts.
Mike.
I have a complete dismantled ZT 260 engine that had done 22k. Engine has one bent con rod, yes bent!
All engine parts available, crank, 7 rods and pistons block, heads clutch, flywheel etc etc.
Contact me if you need any parts.
Mike.
Dare I ask how it got a bent rod?
Mike if you list what you have with a price next to it people will be better placed to pick and choose. That way you want be asked the same questions on availability.
Tim Hayton
Some men see things as they are and say why - I dream things that never were and say why not.
I will type a list later.
With the other question I had, how do you bend a rod, well I will also post a picture.
From my days of saloon car racing, rods allways fail in compression, the rods may bend but it usually shatters within a few revolutions if the engine is screaming. It is more likely this was a partial heat sieze in the bore, as the piston is scored. Bad tolerance from the factory. Bore looks ok and will hone easily, the crank is also fine.
Just to make everyone green with envy I am going to build another engine, and I have obtained a genuine ford motorsport cobra specification steel crankshaft (new), it's the fully counterbalanced variant, and should be good for 9,000 rpm (if the other components would go there). Now looking for a SVO Ford block to build it in.
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
Mike, could be interested in the pulleys at the right price.
The after market items fitted on mine are looking a bit rusty and tatty so would like to take them off and get them cleaned up and possible plated.
A set of spares to use while I doing that would be useful.
2004 MK2 ZT saloon #183 in monogram Twilight
2005 TF160 in monogram Bittersweet, No.4 of 4.
Look even me cars gone GREEN.................................>>>>>> and him so thats us all geen here. good luck Martin (Still green)
I would just like to thank Mike for the replacement PAS pump he has sent to me. My existing one has a bit of a leak so once the weather improves I have another little weekend job to do.
Keith Alexander, Ellesmere, Shropshire UK,