Hi,just a basic first question,can a gear knob off a ZT V6 be adapted to fit the V8 gear shaft.Ours are I presume screw on whereas the V6 version are pull on/off.Regards Ryszard..
Hi,just a basic first question,can a gear knob off a ZT V6 be adapted to fit the V8 gear shaft.Ours are I presume screw on whereas the V6 version are pull on/off.Regards Ryszard..
No they are different. You would need to make up an adapter.
The originals can be refurbished and new ones do come up sometimes on Ebay.
Steve
I had mine refurbished to a high degree, if you can't get one I will look for the guy who did it. Its on the 277 thread if you want to look
1958 Ford Consul Convertible
1965 Ford Zodiac Executive, being restored
1997 Jaguar XK8 Convertible
2003 Number 182 MGZT V8
2004 MGZT cdti Poseidon
2004 Number 76 MGZT V8
Ryszard
Check out these posts
Favorite aftermarket gear knob [Archive] - The Two-Sixties
Who has changed there gear knob [Archive] - The Two-Sixties
Gear Knob [Archive] - The Two-Sixties
Gear Knobs [Archive] - The Two-Sixties
Replacement gear knob recommendation? [Archive] - The Two-Sixties
Gear knobs and all [Archive] - The Two-Sixties
Change Gear Knob [Archive] - The Two-Sixties
New Shiny Gear Knob [Archive] - The Two-Sixties
XPower Gearknob [Archive] - The Two-Sixties
Gearknobs! [Archive] - The Two-Sixties
Gearknob Identification [Archive] - The Two-Sixties
Last edited by Pete; 13-11-2021 at 09:26 AM.
I used to be indecisive but now I'm not so sure.
When you have eliminated the impossible, whatever remains, however improbable, must be the truth
2004 MG ZT 260SE Pearl Black
1960 MGA Roadster Flame Red
Since Ryszard is not (yet) "green", not a full member, he may not be able to see any of those threads.
My wife, for example, who is simply a "registered user", can't. They just give a 'white screen'.
I think because the links above are to Archive threads, rather than possible restricted rights on an underlying, non-public thread maybe?
Attempts to follow links from other posts which directly point to a non-public post or thread, do generate the "you do not have permission to access this page. " message, as you would expect.
David
Last edited by David; 13-11-2021 at 02:44 PM.
Hi David,you are correct,am not yet "green" probably due to this ancient tablet,I got the link for the questionnaire but this tablet will not open it to enable me to fill it in and respond.Dont have a pc or smart phone,still get by in life the old fashioned way!Regards Ry....
Hi Ryszard, I am sending you by email various copies of the questionnaire in the hope that you can open at least one of them. Let me know how you get on. If you can complete one then please send it back to Tim at the email address he has given you.
Nich.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
What tablet is it Ryszard?
I used to be indecisive but now I'm not so sure.
When you have eliminated the impossible, whatever remains, however improbable, must be the truth
2004 MG ZT 260SE Pearl Black
1960 MGA Roadster Flame Red
Hi,thankyou Nich,will have a go tomorrow(Wednesday)when I get the paperwork out.Regards Ry....
Last edited by Ryszard; 16-11-2021 at 11:15 PM. Reason: Name left out
Hi Pete,it is a Tesco Hudl tablet,about six years old,aways been good enough for an oldie like me despite not being able to print off it.Im more of an analogue fan rather than digital!Regards Ry....