Just emailed ZERO to get a quote but thought I would check on the off chance that somebody had a set for sale to save a few quid
Just emailed ZERO to get a quote but thought I would check on the off chance that somebody had a set for sale to save a few quid
Belcher. :eek:<< 'Burp' !
~~~~~~~~~~~~~~~~~
MCSE:S, MCSA:S, MCITP
CompTIA Security+
CompTIA Linux+
Linux LPI Level 1 & 2
Citrix CCA
VMWare VCP4
Certified Ethical Hacker
~~~~~~~~~~~~
Basically, I am a techno-whore
Don't you fancy Xpowers? Generally a set on Ebay not sure how much the Zero's are?
Paul
http://cgi.ebay.co.uk/MG-ZT-260-V8-X...d=p3286.c0.m14
I am in a bit of a conundrum here. I had twin ovals on my previous ZT190 (so been there, done that), so I really wanted to retain the quads. The X-Powers are single ovals (per side), and from what I have read, many people say they are too loud. The Zero's are supposed to be very good, and would give me the quads. However, they are 400 quid a pair plus VAT plus postage. Whilst probably worth the money, they are over my budget. My local Powerflow fitter said that quads in Powerflow were not possible, but ovals either side would be £155 + VAT (per side). I rang another Powerflow centre who said they could do the quads no probs, and quoted me £140 per side. However, I am concerned that if wend for P-Flows, they might not give the improvent in tone that I want.
HELP
Belcher. :eek:<< 'Burp' !
~~~~~~~~~~~~~~~~~
MCSE:S, MCSA:S, MCITP
CompTIA Security+
CompTIA Linux+
Linux LPI Level 1 & 2
Citrix CCA
VMWare VCP4
Certified Ethical Hacker
~~~~~~~~~~~~
Basically, I am a techno-whore
simple answer is to buy the zeros you won't regret it the quality of Kevins workmanship is outstanding, or to buy the x powers and to modify them using some stainless pipe to create the quad look, cut the ovals off, measure a set of quads to work out the spacing and to TIG weld the quads on. Pay me enough and i'll do it for you. My wleding set is waiting to be used again.
Peter
Peter Essling
That would be my preferred option I think. However, with two new tyres recently fitted, just re-taxed it, and two more tyres needed very soon, they are simply out of my budget (at the moment), hence my call for for some nearly new ones on here. Perhaps, I'll wait a while longer until the funds improve
Belcher. :eek:<< 'Burp' !
~~~~~~~~~~~~~~~~~
MCSE:S, MCSA:S, MCITP
CompTIA Security+
CompTIA Linux+
Linux LPI Level 1 & 2
Citrix CCA
VMWare VCP4
Certified Ethical Hacker
~~~~~~~~~~~~
Basically, I am a techno-whore
Belcher, I am waiting a response from Tyell34pt to see if he still wants my second hand Zeros.
If I do not hear from him by next Monday I will contact your good self
Keep it on the road!
Regards, Graham
Max Steele
No: 167, Mk1 04 Reg SE, X-Power Grey,
Upgrades: Powerflow Ovals, BBK 78mm TB/Plenum, ACCEL COP's, RAM Air Intake System with Blue Silicon air intake hose with Pipercross Viper reverse-flow air filter system,
Up-rated Heavy Duty clutch, New Front Discs (back to oem), New rear springs, New front Bilstein shocks, New Rear Discs at 123K, New MG7 rear cluster. lights.
Twin 7" Headrest screens and DVD player with remote control.
Worcester Area :cool:
Belcher. :eek:<< 'Burp' !
~~~~~~~~~~~~~~~~~
MCSE:S, MCSA:S, MCITP
CompTIA Security+
CompTIA Linux+
Linux LPI Level 1 & 2
Citrix CCA
VMWare VCP4
Certified Ethical Hacker
~~~~~~~~~~~~
Basically, I am a techno-whore