I would think the fronts might fit but the brackets for the brake line connections to the calipers will be front to back i think. the actual dampers / Macpherson struts are probably the same. Maybe you can turn them through 180 deg and they will be OK, not sure. As otherwisem the front end suspension is more of less the same on the ZT v8 as others excpet for the steering linkage being forward of the axle line as opposed to rearward in the rest of the zt/75 line and also therefore the brake calipers are the opposite side and the brake line routing is different. but the lower ams etc are the same suggesting the knuckles are pretty similar.