A per other thread. I am off to france and panicking as I need a few bits... Does anyone have a spare or know the best place to buy one. Doing a search of this site made me think I best take one with me.
A per other thread. I am off to france and panicking as I need a few bits... Does anyone have a spare or know the best place to buy one. Doing a search of this site made me think I best take one with me.
Last edited by Dominic22; 02-04-2012 at 09:48 PM.
There is a seller on ebay if you have time.
Have a look at the belt, I replaced mine as there were some cracks appearing on the ribbed side but other than that it looked OK. If your's isn't showing any cracks I wouldn't worry about it.
Think I have one - question is where
Take a look at the what goes where thread in the consumable section on here - lots of part numbers for belts that fit that could be sourced from any autofactors
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end
I believe it is sensible? to carry bits all the time.
Hoses, Belts, Wire ties, Gaffer tape,
.
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end
Dominic, this should help
https://www.two-sixties.co.uk/mgoc26...-v-belt-wanted
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end
Thanks guys.
Ordered from Europarts £16.87 delivered
I gave Stu my new spare belt as it was nfg for the blower
I bought a replacement belt from Brain as my original blower belt was squealing like a pig the new one is dead quiet and the old one is in the just in case box in the boot.
Seriously though have any actually failed? none iirc.
Keith Alexander, Ellesmere, Shropshire UK,
Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end