as above really...

I have sourced the gearbox adapter plate from Scooter (just arrived thanks Brian)

I now require the gearbox to adapter plate gasket(this will be a standard shifter to tremec 3650 gasket

I also need what I believe is referred to as an 'inner boot' it is a dust boot covering the actual ball section of the shifter allowing the 14mm shaft out through the top (mine has perished(I believe it is vibration perished as the rubber has powdered) it sits in a recess of 49.6mm

less important, but I also need the two rubber boots that are at the bottom of the shifter/car body interface...

these last two boots are servicable...just, but the dust boot and gasket are required.

I have found the shifter gasket in the states @ $8 but would prefere a uk delivery for speed

any and all help gratefully received.

Thanks, Nick