Rx06 oac?
Page 1 of 2 12 LastLast
Results 1 to 10 of 29

Thread: Rx06 oac?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 22-06-2011, 11:13 PM #1
    Big Dave
    Big Dave is offline
    Registered User
    Join Date
    Jun 2011
    Location
    Preston, lancashire
    Posts
    387

    Default Rx06 oac?

    Hi there

    i'm thinking about looking at this vehicle this weekend and just wondered whether anyone would have any info on it at all.

    http://www.eddiewright.co.uk/Used-Ca...-ID_34919.aspx

    The reg is RX06 OAC.

    A quick check on the dvla reveals that it has not been taxed since 2009. I havent got the last three numbers of the VIN but will ring the garage in the morning and get it.

    I dont know whether this is an se or not (sorry I'm new to this )

    I am no expert at all although i've been lurking for a while but I've noticed that there are no V8 badges on the front wings and the ZT badges on the boot seem to be in the wrong place for a facelift. I always thought that the facelift ZT badge was underneath the rear number plate although I may be very wrong....

    thanks in advance and I hope to be a more regular poster on here very soon!!

    Dave
    Reply With Quote Reply With Quote
  2. 22-06-2011, 11:16 PM #2
    Herman
    Herman is offline
    Ex-Admin, RIP Herman's Avatar
    Join Date
    Jun 2007
    Location
    Swindon, , United Kingdom.
    Posts
    7,132

    Default

    Quote Originally Posted by Big Dave View Post
    Hi there

    i'm thinking about looking at this vehicle this weekend and just wondered whether anyone would have any info on it at all.

    http://www.eddiewright.co.uk/Used-Ca...-ID_34919.aspx

    The reg is RX06 OAC.

    A quick check on the dvla reveals that it has not been taxed since 2009. I havent got the last three numbers of the VIN but will ring the garage in the morning and get it.

    I dont know whether this is an se or not (sorry I'm new to this )



    I am no expert at all although i've been lurking for a while but I've noticed that there are no V8 badges on the front wings and the ZT badges on the boot seem to be in the wrong place for a facelift. I always thought that the facelift ZT badge was underneath the rear number plate although I may be very wrong....

    thanks in advance and I hope to be a more regular poster on here very soon!!

    Dave
    Unless I am mistaken the VIN maybe #002.
    I'm sure there's a thread on that car here somewere



    Found it https://www.two-sixties.co.uk/mgoc26...d.php?7921-002
    Last edited by Herman; 22-06-2011 at 11:20 PM. Reason: found thread
    Fear keeps you alive. Fearless gets you killed

    Herman

    Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)

    FJ1200, DynoJet Stage 1, K&N filter

    Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
    Reply With Quote Reply With Quote
  3. 22-06-2011, 11:27 PM #3
    Coasting
    Coasting is offline
    Registered User Coasting's Avatar
    Join Date
    Nov 2010
    Location
    Bournemouth
    Posts
    1,298

    Default

    This car has been discussed on here, but maybe on the members section,

    It is apparantly 002, which makes it a very early possibly a development car?

    It is interesting in many ways, but may not be suitable for a non enthusiast.

    Do your research thoroughly on this one, it is not necessarily a bad car, but there are probably things you need to know first!

    It has been for sale for a long time also...
    Reply With Quote Reply With Quote
  4. 22-05-2017, 06:15 PM #4
    roadripper
    roadripper is offline
    Registered User roadripper's Avatar
    Join Date
    Apr 2017
    Posts
    17

    Default

    Hi,
    Are you able to fill me in on the history of this one? I own it, I'm struggling to get my brain around it and so far DVLA have not been forthcoming!
    Reply With Quote Reply With Quote
  5. 22-05-2017, 06:22 PM #5
    Nich
    Nich is offline
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,259

    Default

    Quote Originally Posted by roadripper View Post
    Hi,
    Are you able to fill me in on the history of this one? I own it, I'm struggling to get my brain around it and so far DVLA have not been forthcoming!

    Lots of information on the forum which you will be able to access when you get your questionnaire back to Tim to get full membership.

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).
    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
    Manufactured in the UK by MG Rover Group Ltd.
    Reply With Quote Reply With Quote
  6. 22-05-2017, 06:52 PM #6
    roadripper
    roadripper is offline
    Registered User roadripper's Avatar
    Join Date
    Apr 2017
    Posts
    17

    Default

    Nich,
    Is there an online form? I'm none too handy with a computer & don't have a printer/scanner.
    Reply With Quote Reply With Quote
  7. 22-06-2011, 11:29 PM #7
    Big Dave
    Big Dave is offline
    Registered User
    Join Date
    Jun 2011
    Location
    Preston, lancashire
    Posts
    387

    Default

    Wow thanks for the speedy reply and help!

    Unfortunately it wont allow me to view that thread.

    Would you mind letting me know in a nutshell if its worth me looking at it or is there something sinister?

    many thanks in advance!

    Dave
    Reply With Quote Reply With Quote
  8. 22-06-2011, 11:33 PM #8
    Coasting
    Coasting is offline
    Registered User Coasting's Avatar
    Join Date
    Nov 2010
    Location
    Bournemouth
    Posts
    1,298

    Default

    You have PM
    Reply With Quote Reply With Quote
  9. 22-06-2011, 11:44 PM #9
    Big Dave
    Big Dave is offline
    Registered User
    Join Date
    Jun 2011
    Location
    Preston, lancashire
    Posts
    387

    Default

    I have replied and thank you.

    I will steer clear of this one. I'm already in conversation with oap Pete re his and will be travelling to see it at the earliest opportunity albeit it is a LONG way from me!

    Dave
    Reply With Quote Reply With Quote
  10. 22-06-2011, 11:49 PM #10
    Herman
    Herman is offline
    Ex-Admin, RIP Herman's Avatar
    Join Date
    Jun 2007
    Location
    Swindon, , United Kingdom.
    Posts
    7,132

    Default

    OAP Pete's is a really nice example of a V8 and a honest car.
    Get there quick
    Fear keeps you alive. Fearless gets you killed

    Herman

    Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)

    FJ1200, DynoJet Stage 1, K&N filter

    Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules