gear box mounts for rover 75 v8

[jimmie]

hi guys can any of you`s help me in locating a pair of auto gearbox mounts for my rover 75 v8.any replies will be greatly appreciated
thanks jimmie biggam,elderslie scotland

[tonybubble]

South Lakelands Minis show it as available:

http://www.southlakesminis.co.uk/mou...1-p-30307.html

It appears to be the same as the manual one. Might also be worth contacting your local X Part Dealer - Dreadnought?

[Herman]

If it is the big bracket you're after, look here http://www.southlakesminis.co.uk/bra...0-p-30309.html

Small bracket on the gearbox here http://www.southlakesminis.co.uk/bra...0-p-30401.html

[ksilver]

And here for a new part

[scooter]

Have some of the brackets in stock.

[jimmie]

scooter its not the actual bracket but the rubber mountings/bobbins quite similar looking to round engine mounts
ill phone you in the morning to discuss this and to see if your accufabs are in yet
i also got your reply about the bodyshell i bought but i thought a strengthened unused dtm complete with panels for £620 must be a bargain !
what is your thoughts
cheers jimmie biggam

[jimmie]

hi tony ill phone scooter in the morning
thanks jimmie biggam

[steve00136]

Hope it's OK to resurrect such an old thread but just wondering if there is still a source for these gearbox mount rubbers. Whether they are the same as those used to support other mg rover / land rover boxes.

[David]

Hope it's OK to resurrect such an old thread but just wondering if there is still a source for these gearbox mount rubbers. Whether they are the same as those used to support other mg rover / land rover boxes.

Always could be, I suppose, but since they are for supporting the Ford 4R75W automatic box, which isn't used any other MGR/LR cars (maybe some automatic SV's ??), I think the chances are slim.

David

[steve00136]

David are you saying these rubbers are only used on the auto gearbox as mine is a manual 260?
It's labelled "l" on diagram