gear box mounts for rover 75 v8
Results 1 to 10 of 39

Thread: gear box mounts for rover 75 v8

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User steve00136's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham UK
    Posts
    165

    Default

    It's only done 21k miles now but the engine mountings have been replaced making the cabin a lot quieter, just thought if front rubbers needed replacing the rears may also! No oil leaks either - but they are nearly 20 years old!
    Also give me something to do during next lockdown!!
    Last edited by steve00136; 21-12-2021 at 04:33 PM.
    2003 MG ZT 260 SE #038
    1993 MG RV8
    1975 MGB Roadster

  2. #2
    Registered User SCP440's Avatar
    Join Date
    Jan 2016
    Location
    Witney Oxfordshire
    Posts
    2,260

    Default

    If you look the ones I sent the link too had different load capacities. If a gearbox is about 100kg if you think that is divided by two some that can take 100kg each should be more than up to the job.

    I am tempted to pop one of mine out and see how it looks after 100k miles.

    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •