Master cylinders are quite expensive to replace. If the cruise control is working when the clutch pedal is raised slightly I would investigate the alternatives including repositioning the micro-switch. Remember the cruise control cannot be activated below 40mph (???).
Nich.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
Master cylinder about £230 should be less than an hour of labour charge.Originally Posted by robert.jamieson
drain your cooling system off- assume position again, and put a 15mm t piece in place of your heater passenger/driver distribution valve. should take just about long enough for you to pass out, and not be able to walk properly for an hour when you get out of the car....So, who can tell me how to make heat come out of the passenger side? I don't care personally, but apparently I should
https://www.two-sixties.co.uk/mgoc26...ead.php?t=5936
[SIGPIC][/SIGPIC]
Posting Permissions
Reply With Quote