ZTT in the States
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: ZTT in the States

  1. #1
    No 317 Oh yes and some greeners's Avatar
    Join Date
    Jul 2009
    Location
    Welwyn Garden City
    Posts
    2,312

    Default ZTT in the States

    http://www.wirewheel.com/2004-MG-ZT-...ATE-WAGON.html

    Trawling the net I came across this.....

    a MKI ....with Hairpins and Cruise........!!!!!
    ________
    RC165
    Last edited by greeners; 06-03-2011 at 01:23 PM.

  2. #2
    No 317 Oh yes and some greeners's Avatar
    Join Date
    Jul 2009
    Location
    Welwyn Garden City
    Posts
    2,312

    Default

    .....and I wonder whats in the right hand side of the load area, as the rubber mat is flipped over
    ________
    Dc marijuana dispensary
    Last edited by greeners; 06-03-2011 at 01:23 PM.

  3. #3
    Shot Silk & Supercharged
    Join Date
    Feb 2008
    Location
    Aberdeenshire
    Posts
    2,593

    Default

    RHD and 25,000 dollars - I think I see an export opportunity

  4. #4
    Moderator
    Join Date
    Aug 2008
    Location
    Garvagh. Coleraine, Northern Ireland
    Posts
    9,113

    Default

    I see a big bill!!
    Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end

  5. #5
    Registered User V8 Novi's Avatar
    Join Date
    Feb 2008
    Location
    Eye, Suffolk, UK
    Posts
    386

    Default

    Don't much fancy those instruments on the windscreen pillar - there's enough of a blind spot there already.

    Wonder what the VIN is.

    Colin Sparrow, tearful ex-owner...

  6. #6
    Moderator
    Join Date
    Aug 2008
    Location
    Garvagh. Coleraine, Northern Ireland
    Posts
    9,113

    Default

    Quote Originally Posted by V8 Novi View Post
    Don't much fancy those instruments on the windscreen pillar - there's enough of a blind spot there already.

    Wonder what the VIN is.
    Potentially dangerous too - too close to one's head in an accident
    Colin Ellis #456 It'll be alright in the end. If it's not alright, it's not the end

  7. #7
    #576 ZT-T SE Pearl Black mikpeirce's Avatar
    Join Date
    Nov 2007
    Location
    Hatfield, Hertfordshire
    Posts
    367

    Default

    I believe that was one of the development cars that was left over there after testing.


    Mik Peirce

    Note: This post may contain misspellings, grammatical errors, disorganized sentence structure, or may entirely lack a coherent theme. These elements are natural to the process of writing, and will only add to the overall beauty of the post. :-)

  8. #8
    #217 peterv8's Avatar
    Join Date
    Sep 2009
    Location
    Södra Sandby, Sweden
    Posts
    2,425

    Default

    I like their logo.....

    .....because life is too short to drive boring cars!

    Would be a perfect sticker on the rear of the car.
    There is no substitute for cubic inches!


  9. #9
    Registered User pessling's Avatar
    Join Date
    Aug 2006
    Location
    west drayton, , United Kingdom.
    Posts
    4,813

    Default

    yeah know about this car on here for some time, well since i joined any way. There is some information about on the site regarding it as well
    Peter Essling


  10. #10
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,266

    Default

    Looks like usa260se (Philip C)is selling his car.

    http://www.two-sixties.com/cotm0107/

    and regarding the gauges:

    https://www.two-sixties.co.uk/mgoc26...=7259#post7259

    Post 26

    "The two guages on the A pillar read engine vacuum and fuel pressure - as the A pillar has been modified does anyone know if an A pillar / door surround air bag would have been fitted on a 2003 car. Purchases an air bag assembly while in the UK but surprised to find that it is so large and looks like it would mean a dashboard out job to fit the activation canister - any thoughts."

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •