As above or Screw Fix or phone Brian. http://www.dreadnoughtgarage.co.uk/index.html
As above or Screw Fix or phone Brian. http://www.dreadnoughtgarage.co.uk/index.html
ZTT400 SHM Pearl Black #519 "Super Brick"
ZTT260 Starlight Silver #428
ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple
Thanks again for the quick responses I'll follow up the leads and let you know.
BF.
Hi, Unplated socket head cap screws grade 12.9 M10x1.50x50 will do the job. Not recommended to re-use once removed. They usually come oiled so degrease them before fitting and torque them to 70Nm (Rave mentions 46Nm in the propshaft fitting procedure - which is incorrect). A drop of loctite 271 wouldn't go amiss. Check the link washers are not distorted / damaged - if so replace them.
Regards, Fishy
Last edited by Fishy; 18-11-2009 at 12:19 AM.