New rear dampers bargain, be quick http://cgi.ebay.co.uk/ROVER-75-V8-MG...d=p3286.c0.m14
New rear dampers bargain, be quick http://cgi.ebay.co.uk/ROVER-75-V8-MG...d=p3286.c0.m14
There's two here. Not the yellow once, but according the ad they are the uprated versions and come complete with the top mounting unlike the other one
Fear keeps you alive. Fearless gets you killed
Herman
Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)
FJ1200, DynoJet Stage 1, K&N filter
Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
Yes a good price, I bought six rear and four front for the same price from them.
That should set the car up for a few years.
No. 64 MG 260SE
why thanks that's a bit selfish, you'll never need that many, and the old ones can be refurbished any way.
Peter Essling
Check that the dampers are not Rover spec as they are black. If they are Rover spec they are softer and not suited to the MG260.
The Front dampers I bought from Premier are Yellow and marked as follows.
ON STICK ON LABLE
F4 - VE3 - 5177 - TO
RNB001080
STAMPED ONTO BODY
RNB 001080
1004VE3 5177 TO
The front damper and spring units BOUGHT OF e.BAY are black and marked as follows:
ON STICK ON LABLE
F4 - VE3 - BO14 - TO
RNB 001210
ON SECOND STICK ON LABLE
RND 001390-QR
STAMPED INTO BODY
RNB001200
1604 VE3 B014 TO
AND THE SPRING REB001210
I hope this helps anyone else looking at them,
Other than the MG Rover part number does any one know what the other numbers mean ?
No. 64 MG 260SE
The yellow ones that the first ebay link is to are only for the ZT 260; the epc marks them as 'manual only'.
hth