Do-it-yourself

1 Rinse
2 Tbm, Short for the two bucket method. Use a good wash but about 4 times the recommended mix and add a cap full of apc. The first bucket contains only water the second the wash mix, use a wash mitt not a sponge. Rinse the mitt in the water then into the wash mix then onto the car top to bottom rinsing the car as you go.
3 Clay with lub you can use megs last touch or a greater mix of your wash to water, never let the surface go dry. Stick the clay in its wrap in your pocket at the start. It should now be warm and easy to play with, Tear the clay into small 5cm pads then use again top to bottom. Turn the pick-up in on itself every time you have done a area ie a door panel, more if there is a lot of pick up. If you drop it throw it away.
4. Once claying is complete wash tbm.
5. Polish and Wax.

You have just saved about £200 pounds after the purchase of all above by DIY.