Exhaust clamp half tubular washers wanted for back boxes
Results 1 to 5 of 5

Thread: Exhaust clamp half tubular washers wanted for back boxes

  1. #1
    Tel 07831 457011 Jules's Avatar
    Join Date
    Dec 2006
    Location
    Colwyn Bay, Tel 07831 457011
    Posts
    191

    Default Exhaust clamp half tubular washers wanted for back boxes

    Anyone got or know where to get those semi tubular type washers for the rear exhaust back box clamps.

    I need a pair.

    Cheers Chaps

    Jules 07831 457011
    For 75 ZT Cooling fan work or resistors & General Servicing or just drop in for a cuppa!
    Give me a call in Sunny North Wales.
    People drop their shopping bags when I rev Mine

  2. #2
    Registered User BRM494's Avatar
    Join Date
    Dec 2008
    Location
    Guildford, Surrey.
    Posts
    233

    Default Back Box Clamp.

    And while we are in this area, anyone got a part number for the whole clamp ? It's not shown on Xpart EPC, I guess it comes with the box.

    Most annoying thing is I am sure I saw one listed on ebay about a month ago in an XPart bag with the number on it !!
    Didn't buy it because I thought it would be bad luck as I had not got the 260 then !
    BRM 494 of Just 795, Rare. MG ZT-T 260 SE 389, Rarer. MG METRO TURBO, Getting Scarce. Black Olive ZR X210 one off, ZR-X Unique, MG TF, Fun in the Sun.

  3. #3
    "Beast of the Night" NOCTURNAL's Avatar
    Join Date
    Nov 2006
    Location
    , , United Kingdom.
    Posts
    1,466

    Default

    Dunno if these are mg part numbers, but they are obviously part numbers.... one is the center joint so x2, the other is the rear box ones you require...
    I also need a full set in anticipation of stripping out the exhaust

    _

    70-0418 backbox

    70-0273 center section clamps x2
    Nick

  4. #4

  5. #5
    Tel 07831 457011 Jules's Avatar
    Join Date
    Dec 2006
    Location
    Colwyn Bay, Tel 07831 457011
    Posts
    191

    Default

    From EPC
    Item 5 in red comes up as clamp.
    So it looks like the tubular washers I need are not available separately.
    Time to make some out of some stainless 15mm rod.



    WDE000601 Silencer assembly exhaust system - RH 1 334.29 3 WDE000621 Silencer assembly exhaust system - RH 1 315.11 3 WDE000700 Silencer assembly exhaust system - RH 1 302.33 3 WDE000720 Silencer assembly exhaust system - RH 1 290.70 4 WDE000591 Silencer assembly exhaust system - LH 1 376.81 4 WDE000611 Silencer assembly exhaust system - LH 1 315.11 4 WDE000690 Silencer assembly exhaust system - LH 1 302.33 4 WDE000710 Silencer assembly exhaust system - LH 1 290.70 5 WCL000020 Clamp - 60mm - exhaust 1 29.78 6 WCD001791 Converter assembly-manifold exhaust system - RH 1 369.14 6 WCD001960 Converter assembly-manifold exhaust system - RH 1 0.00 7 WCD001811 Converter assembly-manifold exhaust system - LH 1 369.14 7 WCD001950 Converter assembly-manifold exhaust system - LH 1 0.00 8 FS106307 Screw-flanged head - M6 x 30 2 0.48 9 WDE000660 Bracket - LH, with rubbers - top OR mounting rear silencer 1 12.48 9 WDE000670 Bracket - RH, with rubbers - top OR mounting rear silencer 1 12.48 10 WDE000680 Bracket - lower - mounting rear silencer 2 7.55 11 WCS000200 Mounting-rubber exhaust system 1 0.00 12 WDB000010
    Bracket-exhaust mounting - rear 2 0.00 13 WYH000200 Bracket - exhaust 1 20.88
    For 75 ZT Cooling fan work or resistors & General Servicing or just drop in for a cuppa!
    Give me a call in Sunny North Wales.
    People drop their shopping bags when I rev Mine

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •