Drivers door part
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Drivers door part

  1. #1
    Registered User pessling's Avatar
    Join Date
    Aug 2006
    Location
    west drayton, , United Kingdom.
    Posts
    4,813

    Default Drivers door part

    have a drivers door that i am using to practice paintless dent removal on and machine polishing so have various parts for sale, glass, speakers, door loom, lock mech. if any one wants anything let me know, otherwise its being binned at work tomorrow
    Peter Essling


  2. #2
    The 1st Amtrak MG ;) Stu C's Avatar
    Join Date
    Aug 2008
    Location
    Telford, Shropshire
    Posts
    3,106

    Default

    Put those parts for sale on the 75 owners club, probably alot more interest maybe?
    2004 MG ZT 260 SE #269
    2000 MGF 1.8 Steptronic

    MG ZT260 SE #171 'The Boat'
    - Gone but not forgotten

    Daily Driver:- 2019 Seat Ateca 1.6 TDi Xcellence




  3. #3
    Registered User pessling's Avatar
    Join Date
    Aug 2006
    Location
    west drayton, , United Kingdom.
    Posts
    4,813

    Default

    already have, only the switch pack gone so far, door was only £25 so when i'm done dong to bin it any way, was very surprised how heavy the door was with everything on it
    Peter Essling


  4. #4
    #235 SH4RKY's Avatar
    Join Date
    Jul 2007
    Location
    B'Ham, United Kingdom.
    Posts
    2,792

    Default

    Handle? Ill take that. See how easy they are to dechrome, or other methods of painting them etc.
    Ian

  5. #5
    Registered User pessling's Avatar
    Join Date
    Aug 2006
    Location
    west drayton, , United Kingdom.
    Posts
    4,813

    Default

    okay cool ian if your happy with £5 postage you can pay the same way as the dash, i'll remove it tomorrow
    Peter Essling


  6. #6
    #235 SH4RKY's Avatar
    Join Date
    Jul 2007
    Location
    B'Ham, United Kingdom.
    Posts
    2,792

    Default

    (( Sorry, that's completely the wrong thread. Removed comment ))


    Yeah Peter thats fine. Ill send it over now. Assume it will be the entire exterior handle. Well, as much of it that will come off?




    Oh, Do you have the door card?
    Last edited by SH4RKY; 19-02-2009 at 11:08 PM.
    Ian

  7. #7
    Administrator Tim's Avatar
    Join Date
    Mar 2006
    Location
    Surrey, United Kingdom.
    Posts
    9,490

    Default

    Peter how easy is it to get the whole glass winding gear out? The one in my 75 is starting to rattle.
    Tim Hayton

    Some men see things as they are and say why - I dream things that never were and say why not.

  8. #8
    Registered User pessling's Avatar
    Join Date
    Aug 2006
    Location
    west drayton, , United Kingdom.
    Posts
    4,813

    Default

    pretty easy Tim the hard part is getting the door car off, i taped the window so that it couldn't full down, undone all the bolts and the whole lot, regulator motor etc comes out in one, just disconnect the motor with the plug.

    Ian i do have the door card, the door was from a 75 and is a cream type colour is dirty as well, i wasn't to interested in the door card and pulled it off and broke most of the clips i think???????
    Peter Essling


  9. #9
    Registered User Blue Flash's Avatar
    Join Date
    May 2006
    Location
    W.Yorkshire
    Posts
    1,922

    Default

    Sorry for the intrusion but whilst on the subject of doors I have a full set of the waist trim finishers bar the rear o/s+the drivers door trim,can't see them selling as a job lot so there stashed away in my garage should anyone require one/all as a replacement,as a footnote when I stripped the drivers door trim back the chrome underneath was fairly well rusted,obviously the guy who sprayed em thought sod it it's getting a coat over it no one will see for the time being...what a naughty man!.

  10. #10
    #235 SH4RKY's Avatar
    Join Date
    Jul 2007
    Location
    B'Ham, United Kingdom.
    Posts
    2,792

    Default

    No worries about the door cards... they are cheap enough from breakers usually. If I reupholster my seats and dash I would think about doing the door cards too so would need 4 anyway.
    Ian

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •