Rear CV Joints And Reluctor Rings

[Geoff G]

HI all

I read a post a while a go where a member was fitting the outer rear CV joints supplied by DMGRS and new reluctor rings. Ive had new rings fitted some years ago and the CV joints cleaned up, the problem has again reared its ugly head and Im wanting to Know of the work he did was successful,I cant find the post.
Can anybody help.

Cheers Geoff G

[jeff turbo]

HI all

I read a post a while a go where a member was fitting the outer rear CV joints supplied by DMGRS and new reluctor rings. Ive had new rings fitted some years ago and the CV joints cleaned up, the problem has again reared its ugly head and Im wanting to Know of the work he did was successful,I cant find the post.
Can anybody help.

Cheers Geoff G

DMGRS don't supply reluctor rings Geoff or CV joint's from memory, do you need both on one side or both sides? Rings are available here https://www.reluctorrings.com/cars/rover
also have a read of this about Jag CV joints https://www.two-sixties.co.uk/mgoc26...light=cv+joint

[David]

B and G list the shaft and outer CV as a unit. Showing "Get Stock Alert" rather than "Buy Now", and at £564 each.
You would need to call to get the low down on the actual stock situation I imagine.

David.

[jeff turbo]

B and G list the shaft and outer CV as a unit. Showing "Get Stock Alert" rather than "Buy Now", and at £564 each.
You would need to call to get the low down on the actual stiock situation I imagine.

David.

£564 each??? blimey