Injector o rings
Hello all,
277 has decided to start spraying fuel from one of the injectors where the fuel rail meets the injector,
Im assuming its goingto be the o ring that sits on the injector has anypne got any links to a suitable o ring that will do the job.
Thankyou Phil
Hi Phil, you might be able to get some information from this thread.
How to identify the injector O rings and injectors. (two-sixties.co.uk)
Nich.
Nicholas John Peter Tinker - # 484
Manufactured on Tuesday 27th April 2004 @ 12.17.47.
Commission Number: 24468.
Brochure Model: M3 Tourer 4.6 V8 260PS.
Specification Code: L01B.
CICode: D1511.
Trim Level: TL8.9 (M3).
65th ZT-T 260SE to be made out of 115.
11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.
Manufactured in the UK by MG Rover Group Ltd.
Cheers Nich
Thats handy thankyou.
Found some at DMGRS
They are a standard item size on most injectors for a V8 and V6 , also the same as mg montego, Volvo etc etcOriginally Posted by phil260
1958 Ford Consul Convertible
1965 Ford Zodiac Executive, being restored
1997 Jaguar XK8 Convertible
2003 Number 182 MGZT V8
2004 MGZT cdti Poseidon
2004 Number 76 MGZT V8
Posting Permissions
Reply With Quote