Yep. Torx T-20.Originally Posted by Ryszard
As 'Ryszard' says, use a quality Torx bit dead straight on the bolt head, Geoff. The star recess is very shallow, about 2mm I think, so clean them well to ensure a good seat for the socket end.
David
Yep. Torx T-20.
As 'Ryszard' says, use a quality Torx bit dead straight on the bolt head, Geoff. The star recess is very shallow, about 2mm I think, so clean them well to ensure a good seat for the socket end.
David
Last edited by David; 06-07-2023 at 12:28 PM.
Posting Permissions
Reply With Quote