Brake overhaul

[phil260]

Just in the process of over hauling the brakes on 277, going to be fitting new discs front and rear and new pads they are all taken care of.
I want to replace the drum brake pads on the hand brake, the research that ive done is directing me to Peugeot 607 pads,has anyone used these or have you found any other ones that fit well.

Last question does anyone know if the backing plates for the front disc brakes are available any where.


Thankyou

[David]

J... research that I've done is directing me to Peugeot 607 pads ...

Assuming you mean 'shoes'? I have used the Peugeot ones and found that they fit and work well, and offer a cheap solution. You will find original shoes and back-plates at Brown and Gammons. This is their current list of 260 parts. https://www.ukmgparts.com/catalogue/...r-75-zt-v8-260

David.

[phil260]

Thankyou David,

Yes shoes, thankyou for the link.

Kind regards Phil

[David]

Thankyou David,

Yes shoes, thankyou for the link.

Kind regards Phil

Looks like B&G are only showing back-plates for the rear of the car, Phil.

David

[phil260]

They certainly are, everything is now ordered accept front back plates.

[ceedy]

original fit were TRW handbrake shoes ..

[SCP440]

I am sure I used shoes off a 406, the only diffrence was a chamfer in the end of the shoe that was not on the new ones.

They adjusted up and worked well but needed another tweak a couple of weeks later to get them back up to 100%,

[David]

I am sure I used shoes off a 406, ...

IIRC some but not all 406 models use the same shoes as 607's, which could explain that. Most on-line parts suppliers show TRW GS8683 for the 607, and that is indeed the part I have fitted, looking back at the invoice.

David

[jeff turbo]

I used brake shoes off a 607 and they are near the same, it's also in the index if you have a look

[phil260]

Ive gone for the 607 rear shoes,went on euro carparts website got a price on the pagid ones,then went on ebay and got them of their ebay page and saved over a tenner.