Part numbers wanted

[JJay]

Those are MGR numbers that Nich gave you. Essentially the front discs and calipers are the same as the ZT 190 (and the BMW 330 actually), but since the calipers are mounted trailing on the V8's, you use the ZT 190 left caliper on the right of the car for the ZT 260 and the ZT 190 right caliper on the left.
Rover 75 V8 and MG ZT 260 are the same.

David

Strangely enough I may also have an issue with the nsf caliper. I had my car in the garage to check the brakes. So from what you say David if it needs replacing the garage should obtain a right hand side one to fit is that correct?

[David]

Strangely enough I may also have an issue with the nsf caliper. I had my car in the garage to check the brakes. So from what you say David if it needs replacing the garage should obtain a right hand side one to fit is that correct?

Sorry mate since emigrating to Holland 50 years ago, I have trouble remembering what n/s and o/s is!
Is "nsf" left ? Think so?
A right hand ZT 190 caliper will fit the left hand side of your 260, and vice versa

Maybe better to use terms like "LH" and "RH". Much easier, and importantly that is how MGR designated all the bits!

David.

[JJay]

Sorry David, wrongly i am only thinking in terms of RHD cars. You are correct ,for me N/s/f is the left side of the car for a RHD car. So i would have to order a right hand caliper to fit the left side.