Handbrake Compensator
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Handbrake Compensator

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User
    Join Date
    Apr 2018
    Posts
    7

    Default Handbrake Compensator

    Hi Everyone
    I need to sort my handbrake but I cannot find where to buy a new compensator.
    I believe there is a stainless steel one available.
    Can anyone point me towards where I can buy one

    I also need rear brake pads

    Thanks
    John
    Last edited by TVRJAS; 01-05-2021 at 10:24 PM.

  2. #2
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,306

    Default

    Quote Originally Posted by TVRJAS View Post
    Hi Everyone
    I need to sort my handbrake but I cannot find where to buy a new compensator.
    I believe there is a stainless steel one available.
    Can anyone point me towards where I can buy one

    I also need rear brake pads

    Thanks
    John

    All the information is in the INDEX John.

    https://www.two-sixties.co.uk/mgoc26...e-Modification

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  3. #3
    Registered User steve00136's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham UK
    Posts
    165

    Default

    I've done this job recently and the instructions above are excellent. I found that removing the centre console top lid and tray just gave that little more access for manoeuvre. Put a few photos on my blog at https://mgzt.info/2021/03/23/handbra...mpensater-mod/
    2003 MG ZT 260 SE #038
    1993 MG RV8
    1975 MGB Roadster

  4. #4
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    6,150

    Default

    As Steve says, the Index description of doing the swap is excellent.

    I think this is the correct one; certainly looks right:
    BMW MINI ONE COOPER S R50 R52 R53 HANDBRAKE LEVER CABLE CONNECTOR 2001-2006 | eBay

    If you do go for the Mini R53 compensator, generally available on eBay, and probably better than the stainless one from Arctic anyway, you should read this thread below though, since there are two different length cables, depending on the year of Mini.
    https://www.two-sixties.co.uk/mgoc26...ke-Compensater .

    David
    Last edited by David; 02-05-2021 at 09:21 AM.

  5. #5
    Registered User
    Join Date
    Apr 2018
    Posts
    7

    Default

    Thanks David
    I will have a look on Ebay
    Not looking forward to fitting it though.
    John

  6. #6
    Registered User
    Join Date
    Apr 2018
    Posts
    7

    Default

    Thanks Steve
    Your reply will be very helpful when I am up to my waist in interior trim
    John

  7. #7
    Registered User
    Join Date
    Apr 2018
    Posts
    7

    Default

    Just another question.
    Where do I buy the rear disc pads
    Thanks
    John

  8. #8
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    6,150

    Default

    Any good motor factor supplying the make you choose. There are fake pads around on the net though, so take care on line.

    Members have different preferences, but personally I use Pagid/Hella pads all-round. The rear Pagid number is T1209.
    More background on different pads here:

    https://www.two-sixties.co.uk/mgoc26...ear-Brake-Pads

    Consider replacing the saddle plates and guide/retention pins too:
    Lotus Elise version, used on the fronts on the Lotus, rears on our cars of course. Not expensive (that price is for one wheel, though) :
    https://www.eliseparts.com/shop/brak...er-plate-pins/

    Also Nick at Austin Garages (member 'X13#18') does a complete set of plates/pins/pads, using original MGR pads, SFP000380.
    https://www.ebay.co.uk/itm/193933293...gAAOSwADVgQBMZ
    Also look at his description and the photos in that advert, explaining right and wrong pad shapes.

    David
    Last edited by David; 02-05-2021 at 02:10 PM.

  9. #9
    Registered User
    Join Date
    Apr 2018
    Posts
    7

    Default

    Hi David
    thanks for the info.
    I have looked at Euro Car Parts but they were not pads for the AP callipers
    Hence the question
    John

  10. #10
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,306

    Default

    Got mine from Nick at Austin Garages.

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •