Tool Kit Parts - Wanted
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Tool Kit Parts - Wanted

  1. #1
    Registered User
    Join Date
    Oct 2006
    Location
    York, , USA.
    Posts
    32

    Default Tool Kit Parts - Wanted

    My car came without some of the tools you'd expect to find under the rear floor board.
    I'm looking for help finding the following.

    Foam molded tool support (the grey foam filler that goes were a spare tyre could have been installed) Mine was cut up while vehicle was being tested.
    Tow hook
    Wheel trim removal tool
    Correct flat tyre foam can
    Any other tools that should have come with the car (all I have is the locking wheel nut, jack and warning triangle.

    Please email me if you can help with any tools - thanks

  2. #2
    Registered User
    Join Date
    May 2006
    Location
    West Midlands, , United Kingdom.
    Posts
    140

    Default

    I got my V8 direct from Longbridge. It had the cans of foam tyre repair but no Jack, etc. I got a foam tool kit from another Rover 75 and carry it in the boot of my car which with a full sizre spare wheel just about fills the boot! I can photograph what I have if you would send me your email address. I was in contact with you last year when I was selling XPower Car Mats on eBay Regards Ian
    MG Rover Supporters Club

  3. #3
    ZT400 GeoffW's Avatar
    Join Date
    May 2006
    Location
    Stroud, , United Kingdom.
    Posts
    2,536

    Default

    Phil, you should also have the towing eye that screws into the chassis through the small square knock out in the front bumper ?

  4. #4
    Registered User
    Join Date
    Jul 2007
    Location
    Epsom, Surrey, United Kingdom.
    Posts
    33

    Default

    Looking at my handbook, the kit also had a screwdriver and safety goggles. These are both missing on my car, but I guess are easy to replace. Not sure if the screwdriver is a flathead of phillips though.
    2004 SE - VIN 180 (Zero Ovals, K&N air filter)

  5. #5
    Registered User Harrygsi's Avatar
    Join Date
    Jul 2006
    Location
    Norwich, , United Kingdom.
    Posts
    471

    Default

    quote:Originally posted by usa260se

    My car came without some of the tools you'd expect to find under the rear floor board.
    I'm looking for help finding the following.

    Foam molded tool support (the grey foam filler that goes were a spare tyre could have been installed) Mine was cut up while vehicle was being tested.
    Tow hook
    Wheel trim removal tool
    Correct flat tyre foam can
    Any other tools that should have come with the car (all I have is the locking wheel nut, jack and warning triangle.

    Please email me if you can help with any tools - thanks
    Try these breakers Phil, says they have 8 V8's to break!!??
    http://cgi.ebay.co.uk/ws/eBayISAPI.d...ADME:B:SS:UK:1

    Cheers
    Peter
    Camchainman
    259 - Black Olive
    MGF 2001
    MGB 1970
    MINI COOPER 'S' 2005
    Lotus Carlton 1991
    'Success consists of going from failure to failure without loss of enthusiasm'

  6. #6
    Registered User pessling's Avatar
    Join Date
    Aug 2006
    Location
    west drayton, , United Kingdom.
    Posts
    4,813

    Default

    looks like its been rolled that one
    Peter Essling


  7. #7
    ZT400 GeoffW's Avatar
    Join Date
    May 2006
    Location
    Stroud, , United Kingdom.
    Posts
    2,536

    Default

    It would be interesting to actually find out how many were written off.

  8. #8
    Registered User pessling's Avatar
    Join Date
    Aug 2006
    Location
    west drayton, , United Kingdom.
    Posts
    4,813

    Default

    i've email to ask for the vin, see what that brings back...
    Peter Essling


  9. #9
    Archived Member
    Join Date
    Sep 2006
    Location
    Brentwood , United Kingdom.
    Posts
    153

    Default

    [quote/]

    Try these breakers Phil, says they have 8 V8's to break!!??
    http://cgi.ebay.co.uk/ws/eBayISAPI.d...ADME:B:SS:UK:1

    Cheers
    Peter

    [/quote]

    It currently says they have five, not eight. It also says postage is £100 - for a wiper blade ????

  10. #10
    #235 SH4RKY's Avatar
    Join Date
    Jul 2007
    Location
    B'Ham, United Kingdom.
    Posts
    2,792

    Default

    I wouldn't touch that ebayer with a 6km barge pole.

    New user, 10 feedback, all from items costing nothing to boost the 100% positive rating.

    Just dodgy in my eyes. That and the 100 pound postage, which to be fair is probably there just to stop people bidding on the item as the listing is just an advertisment for the company... well I say company... haha.

    and another thing, i'm no expert and could well be wrong but err yeah I can't see this being legal at all: 'We even do FRONT END CUTS that you can simply thus weld on'



    Ian

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •