Rover V8 premium bumper chrome surround.
Results 1 to 10 of 26

Thread: Rover V8 premium bumper chrome surround.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    5,966

    Default

    I know the owner of #595 claimed the system was "all wrong" (probably because he was looking for / been sold a MG ZT260 mixer valve, not the different R75V8 one, at a tad under £600 quid). He had quite a lot of leeway to invest some money on top of the 'hammer-price' at last year's auction though. All Rovers including the V8 should have the thumbwheel of course, unlike the ZT 260, but that special L/R mixer 4-pipe-valve. None should have a bodge constructed from R45 valves!

    Rover mixer valve, 1 actuator motor, 2 valves, "iffy"nylon tracked actuator-peg (LHD version).

    IMG_1289.jpg

    All the part numbers of the valves etc are here, but drop me a line by PM if you need any info, which may well not be visible to you, so long as you promise to join as a full member when you get a car !!

    David
    Last edited by David; 13-10-2019 at 05:52 PM.

  2. #2
    MGF Reg. Rep - S.Wales
    Join Date
    Jun 2018
    Location
    Just south of the Brecon Beacons
    Posts
    64

    Default

    That's interesting.

    The platinum 75 I went to look at in Buckinghamshire had the V8 badge, not the thumbwheel.

    Therefore I'd just believed (wrongly) they were the same as the ZT 260's.

    Now I think of it, the one near me has a thumbwheel too!!

    He told me that it had two valves and they only found replacements by taking the part numbers off the old ones, which were the same as the ones on the R45 V6!

    So I was right when I though he didn't really know anything. He did seem to be "full of it" so to speak.

    10k was a laugh.... 8k is still a chuckle. Basically he bought at auction and lost. (Doubt he will accept that, though).

    You never know, if he'll let it go cheap enough I may "rescue" it....

    And, yes I'll definitely be a full member - probably before I make the actual purchase!

  3. #3
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    5,966

    Default

    FYI, Just added a photo of the R75V8 L/R mixer valve to my earlier post,

    David

  4. #4
    MGF Reg. Rep - S.Wales
    Join Date
    Jun 2018
    Location
    Just south of the Brecon Beacons
    Posts
    64

    Default

    Quote Originally Posted by David View Post
    FYI, Just added a photo of the R75V8 L/R mixer valve to my earlier post,

    David
    Hmmm.... almost looks like an adapted VIS motor...

  5. #5
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    5,966

    Default

    Quote Originally Posted by EbbwBen View Post
    Hmmm.... almost looks like an adapted VIS motor...
    Believe me, in real life it doesn't!

    David

  6. #6
    MGF Reg. Rep - S.Wales
    Join Date
    Jun 2018
    Location
    Just south of the Brecon Beacons
    Posts
    64

    Default

    Quote Originally Posted by David View Post
    Believe me, in real life it doesn't!

    David
    I'm sure it's not.. that would be waaaay too easy!!

  7. #7
    Registered User
    Join Date
    Mar 2010
    Posts
    56

    Default

    Ben, I don't have a spare surround but I do have three OEM premium bumpers complete with chrome surround. To be honest I don't really need three, one is for my Rover 75 CDTi, one would be a just in case spare and the third I could be tempted to sell if it helped you secure the car you want. Let me know if you are interested Regards John

  8. #8
    MGF Reg. Rep - S.Wales
    Join Date
    Jun 2018
    Location
    Just south of the Brecon Beacons
    Posts
    64

    Default

    Quote Originally Posted by BigJohn View Post
    Ben, I don't have a spare surround but I do have three OEM premium bumpers complete with chrome surround. To be honest I don't really need three, one is for my Rover 75 CDTi, one would be a just in case spare and the third I could be tempted to sell if it helped you secure the car you want. Let me know if you are interested Regards John
    Thank-you John, that's very good of you, and yes - I'm interested!

  9. #9
    Registered User
    Join Date
    Mar 2010
    Posts
    56

    Default

    Quote Originally Posted by EbbwBen View Post
    Thank-you John, that's very good of you, and yes - I'm interested!
    Hi Ben I have sent you a message about the bumper

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •