cranking not starting - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: cranking not starting

  1. #11
    Registered User
    Join Date
    Mar 2018
    Posts
    12

    Default

    Quote Originally Posted by SCP440 View Post
    Do you have 12v at the pump?

    If you do then you probably need a pump if not it could be the module in the boot, a relay, fuse or the the ECU is not sending a signal for some reason. I know on som GM vehicles a faulty CPS can cause this.

    Steve
    One of wires supply 11+ voltage on key position one.

  2. #12
    Registered User
    Join Date
    Jan 2011
    Location
    Breda Holland
    Posts
    55

    Default

    Quote Originally Posted by werdna232002 View Post
    hi! the car as described above is cranking and would not start, i could not hear the pump priming. the car already has the orange clip on the fuel filter. i have checked fuses and swapped relays but still no joy.
    Please try this:

    • Put on ignition but dont start!
    • Wait for at least 20 min.
    • now start the engine
    • is it running?

    the time waitng is very important while ignition is on so dont turn key to starting else it is not possible

  3. #13
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    5,904

    Default

    Quote Originally Posted by robbenMGV8 View Post
    Please try this:

    • Put on ignition but dont start!
    • Wait for at least 20 min.
    • now start the engine
    • is it running?

    the time waitng is very important while ignition is on so dont turn key to starting else it is not possible
    Do you have any idea what caused that highly unusual situation for you, Robben? Is it solved (for you) now?
    Sounds like something "warming up" before it functions! Odd.
    I know you were looking at the ECU with Damen en Kroes, but did that resolve it?

    David

  4. #14
    Registered User
    Join Date
    Jan 2011
    Location
    Breda Holland
    Posts
    55

    Default

    damen en kroes can't solve it because they don't have the software to learn a new ecu but nobody has because this note is made by mgrover for the v8 The pats system of the ford ecu is causing the problem and this is a known problem at ford. the only solution now available is that someone with the right ford software removes the old ecu software and converts it into a new one

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •