Lock stock & two broken barrels - Page 2
Registered User
Be careful, there are a lot of cheap and nasty Chinese key bodies on Ebay that require considerable modification to get the two halves to fit together correctly with the PCB etc in them. Whatever you do don't leave the immobiliser chip in the old key body!
Registered User
Bought a pair of these over a year ago. First one still in use and operates fine.
#427
Ok, finally got round to fixing the spare key - absolute doddle (yes, the old one was a mess - storing superglue in the same drawer not a wise move!) Replacement fob £3.99 from discounted-fobs on Fleabay https://www.ebay.co.uk/itm/Rover-75-...53.m2749.l2649 - just make sure EVERYTHING comes out carefully and fits back in snug - seemples
Attachment 10936 Attachment 10937 Attachment 10938 Attachment 10939 Attachment 10940
#427
And while I was on a roll, changed the nearside wing mirror cover that I had managed to graze along the wall of the house - another piece of cake - only £7 from bas-mini-spares on EBay and 5 minutes to change rather than respraying - lugs are on the underside, so pop off and refit starting at the top - https://www.ebay.co.uk/itm/Rover-25-...53.m2749.l2649 20190224_140539.jpg 20190224_140756.jpg 20190224_140911.jpg
Last edited by Mean Green; 25-02-2019 at 12:07 AM .
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules