MK1 v MK2

[ceedy]

Has anyone changed the mark 2 BCU and got it to work on a mark 1 (Just for the boot release)?

can be done with the TOAF program ..Also you can do LSM changes and Coding new Keys.

Cut N pasted .. for BCU swap .

Swap a Mk1 to MK2 BCU with Toaf .

Outline ...THe old BCU data is backed up and transferred to new one, VIN corrected and remote boot opening enabled, simple and hassle free,
no need to change ZCS coding or anything!

The job is straight forward.
back up the old BCU.
disconnected the Battery.
Remove glovebox and swapped over the BCU's
Reconnected the battery if alarm goes off ,disconnect it for the moment!
Then read the BCU which will come up with a VIN mismatch,
Copy the VIN number from the IPK and do a back up from my original BCU data.
Lastly enable the remote boot locking.
Reconnect the alarm

done .

C.

Any problems you can revert back to what you started with using "restore".

end..