MK1 v MK2
Results 1 to 6 of 6

Thread: MK1 v MK2

  1. #1

    Default MK1 v MK2

    Is there any fundamental difference between the mk1 and mk2 aside from aesthetics?

    Anything different to look out for, like some design flaws that may have been ironed out by the time the mk2 came into being?

    Thanks in advance

    Tony
    Last edited by SWISSTONY; 20-11-2018 at 07:48 PM.

  2. #2
    Registered User scoubix's Avatar
    Join Date
    Jul 2014
    Location
    France, 91
    Posts
    379

    Default

    Aside from the body trim, the main difference is that mk2 introduced cruise control and traction control systems. Cruise control is as effective as on any other car, traction control is a very basic design which cuts off fuel when a rear wheel is spinning, something which any engine and particularly the Ford V8 doesn't like much. Shouldn't have been introduced in many people's opinions...
    1999 2.5 V6 Rover 75 Connoisseur - Dealer Launch - LHD
    2004 4.6 V8 MG ZT-T (the only known auto ZT-T V8) - LHD
    1993 2.7 V6 Rover 827 Coupé - LHD

  3. #3
    #242 V8 on tour colintf's Avatar
    Join Date
    Jul 2007
    Location
    Bristol / or back home in Cornwall, United Kingdom.
    Posts
    17,454

    Default

    You can open the boot using the key in the bootlock on the mk1 but not the mk2
    colintf
    Colin Murrell
    vin 00242 - Probably the only 260 to have driven the full Le Mans circuit?
    MG Car Club Z Register V8 ZT/ZTT Rep.
    MG Car Club V8 Register V8 ZT/ZTT Rep
    MG Car Club MGF Register Regional Rep for Devon & Cornwall and Cotswold Regions.
    MG Car Club MGF Register International Liaison Representative

    http://www.mgfim.org/

    http://www.two-sixties.com/main.htm

    http://www.v8register.net/

    http://www.mgfregister.org/

    http://www.racethemg.com/ http://www.triple-mracing.com/



    Member of MGCC (UK), MGOC & TSSC (Triumph Sports Six Club)

  4. #4

    Default

    Has anyone changed the mark 2 BCU and got it to work on a mark 1 (Just for the boot release)?

  5. #5
    just more wrinkle ! ceedy's Avatar
    Join Date
    Feb 2010
    Location
    Somerset
    Posts
    383

    Default

    Quote Originally Posted by gignwah11 View Post
    Has anyone changed the mark 2 BCU and got it to work on a mark 1 (Just for the boot release)?
    can be done with the TOAF program ..Also you can do LSM changes and Coding new Keys.

    Cut N pasted .. for BCU swap .

    Swap a Mk1 to MK2 BCU with Toaf .

    Outline ...THe old BCU data is backed up and transferred to new one, VIN corrected and remote boot opening enabled, simple and hassle free,
    no need to change ZCS coding or anything!

    The job is straight forward.
    back up the old BCU.
    disconnected the Battery.
    Remove glovebox and swapped over the BCU's
    Reconnected the battery if alarm goes off ,disconnect it for the moment!
    Then read the BCU which will come up with a VIN mismatch,
    Copy the VIN number from the IPK and do a back up from my original BCU data.
    Lastly enable the remote boot locking.
    Reconnect the alarm

    done .

    C.

    Any problems you can revert back to what you started with using "restore".

    end..
    Last edited by ceedy; 26-11-2018 at 12:23 PM.


    Our Three bloo's, ZR105, ZT 260#50 , CDTI Auto ,now No1 Son has spoilt the set with a Firefrost 1.8T


  6. #6

    Default

    Excellent I have a mark 2 bcu and toaf just collecting my 260 Saturday from lates.com for a service and rear lateral arm bush change ( he said it was a git of a job) plus diff leak check ( rear plate looks like the cause rather than any of seals ) so that’s next on the todo list

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •