Bolt availability information

[Nich]

I have a TYG000250 in front of me. It's M10 x 1.5 x 50mm with a threaded portion of 40mm and a full diameter of 7mm. The flanged bolt head suits an E12 socket.

Unfortunately a DIN 912 socket head capscrew M10 x 50 12.9 has a threaded portion of 32mm. You can buy these quite readily. You'd have to get an M10 x 1.5 (standard M10 pitch) die to extend the thread if you wanted to replicate the original.

Regards

Andrew

Can you post a photo Andrew? Could possibly get a longer bolt and cut down to length?

Or

Finish	Self Colour
Fully Threaded	Yes
General Tolerances	+/- 0.13mm
Head Diameter (D)	16mm
Head Length (H)	10mm
Hexagon A/F (J)	8mm
Hexagon Depth (P)	5mm
Length (L)	50mm
Manufacturing Standard	DIN 912
Material	12.9 Hardened Steel
Material Specification	12.9 Hardened Steel
Screw Thread Pitch	1.5mm
Thread Length (Max)	50mm
Thread Size (T)	M10 (10mm)

Bolt (2).png Bolt (1).png
Nich.

...

[SCP440]

Is a fully threaded version not available?

Steve

[Nich]

Too late Steve, fully threaded available.



Nich.

...