V8 260 - Rear ABS reluctor rings
Results 1 to 10 of 10

Thread: V8 260 - Rear ABS reluctor rings

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User
    Join Date
    May 2014
    Posts
    1

    Default V8 260 - Rear ABS reluctor rings

    I'm trying to identify the rear ABS reluctor rings fitted to our rear drive shaft outer joints?
    So far I've managed to identify the MGR Part No: TDC000270 for the drive-shaft units, which I would bet are OE BMW parts, so one possibility is a cross-over to a readily available BMW part, either OE or after-market, but I could be wrong, advice please.
    The reluctor rings are the punched steel ladder ring type, rather than the castellated type and I'm hoping some one has previously identified them on the forum and can provide the measurements of the ring or even a part no:/supplier with this information it'll be relatively easy to identify a potential supplier for everyone to use in the future

  2. #2
    Registered User SCP440's Avatar
    Join Date
    Jan 2016
    Location
    Witney Oxfordshire
    Posts
    2,237

    Default

    The one listed for a ZT on this page is the correct one
    http://www.reluctorrings.com/cars/rover
    We had this discussion a few months ago.

    Steve

  3. #3
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    5,917

    Default

    Maybe Paul, not being a fully signed up member (yet), didn't have access to the thread?

    David

  4. #4
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,252

    Default

    It looks like Paul joined 4 years ago but hasn't managed to get his questionnaire back to Tim.

    If you are reading this Paul it's time to get full membership by returning your questionnaire or asking for a new one. All of the information you need is on our full site.

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  5. #5
    #829 called 'Olive' David's Avatar
    Join Date
    Jun 2015
    Location
    Breugel, Holland
    Posts
    5,917

    Default

    Quote Originally Posted by Nich View Post
    It looks like Paul joined 4 years ago but hasn't managed to get his questionnaire back to Tim.

    If you are reading this Paul it's time to get full membership by returning your questionnaire or asking for a new one. All of the information you need is on our full site.

    Nich.
    On FB a lot apparently, but never once here. The reluctor ring problem elicited no answer there, as far a I can see.

    David

  6. #6
    #264
    Join Date
    Jul 2009
    Location
    Sheffield
    Posts
    477

    Default

    How do these rings fit?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •