Mk1 ZT Saloon SE Trophy Blue S/C Dreadnought.
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Mk1 ZT Saloon SE Trophy Blue S/C Dreadnought.

  1. #1
    Registered User Blue Flash's Avatar
    Join Date
    May 2006
    Location
    W.Yorkshire
    Posts
    1,922

    Default Mk1 ZT Saloon SE Trophy Blue S/C Dreadnought.

    Well I never thought that this day would come,but with a heavy heart I am placing my 5th member of the family of the last 12 years up for sale,converted to s/c spec back in October 2005 and with a proven print out (laminated)dyno pull of 410 bhp and exactly 400 Ilbs ft torque makes this car no slouch and can still show a clean pair of heels to most of today's modern machinery!,this car has a full service history stamped up in the owners handbook,and just the odd few bills kicking around as foolishly I did not retain or file most of them as the car was a long term keeper and I never thought that it would ever get sold not even in my wildest dreams.This car is well documented on this site and there are no skeletons hidden in any cupboards.To be perfectly frank and honest I have done just over 6k in the last 3 years in the beastie and less than 100 miles this year alone,the recorded mileage is just over 106k which is nothing to these ford lumps,400k or more would seem to be the average lifespan I have seen quoted on the Mustang forums over the pond,I am fairly sure that there some cars on this forum with big number mileages to testify the reliability of these cars. The car has been ultra reliable over the 12 years of ownership and has wanted for nothing THE CAR HAS A CURRENT MOT TILL 26 feb 2017 WITH NO ADVISORIES.Below are some of the parts that have been fitted recently.


    July 2015 NEW L&R CATS with the correct gaskets fitted.Brand new 2 speed radiator fan motor,new battery,NEW and correct serpentine belt
    Sept 2015 Polished idler pulley,NEW alternator,NEW air con radiator,NEW air con bearing,
    Nov 2015 new mtec discs drilled 325mm (front) also fitted at the time new calipers,new pads, refurbed carriers and new flexi (MGR)brake pipes.New front tyres 225/45/18 NEW rear AVON ZZ5 245/40/18.
    MAR 2016 NEW x 2 supercharger idler pulleys fitted.
    The interior is full SE SPEC black leather in first class condition with minimal wear on the drivers side bolster although there is a small split on the man made plastic part of the bolster which probably will repair,the sun roof works as it should,sat nav,cd and radio all function correctly,as do the front electrics on the seats.As the car has had little or no use for the last 3 years but has been stretched to keep all the mechanical,s in working and first class order,

    The body work is in exceptional/first class condition for a car of this age no supermarket dings.... nothing!,



    BAD POINTS. rear discs will require replacing or skimming soon(this was a job to be done this year before the selling decision was taken).
    Drivers door pull lever has recently gone off on one last month, ie the 2 stage pull is playing up I think part of the linkage has snapped the door still functions correctly as does the key fob central locking with 2 keys.


    I CAN BE CONTACTED VIA this forum or on 0790six07seven9two4 ANY TIME DURING THE WEEK AND ANY VIEWINGS WOULD HAVE TO TAKE PLACE AT THE WEEKEND. THE CAR IS LOCATED AT KEIGHLEY WEST YORKSHIRE. PICTURES TO FOLLOW. Added but not helped by the weather!



    PRICED AT £8500.00
    Attached Images Attached Images
    Last edited by Blue Flash; 13-03-2016 at 03:55 PM.

  2. #2
    Registered User Tornado Red's Avatar
    Join Date
    Jan 2016
    Posts
    7

    Default

    How can it have an MoT till May 2017??

  3. #3
    Registered User Blue Flash's Avatar
    Join Date
    May 2006
    Location
    W.Yorkshire
    Posts
    1,922

    Default

    Well spotted and ammended

  4. #4
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,259

    Default

    Any thoughts on where I can get £13500 anyone?

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  5. #5
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,259

    Default

    Need some photos Paul.

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  6. #6
    Registered User Tornado Red's Avatar
    Join Date
    Jan 2016
    Posts
    7

    Default

    I think taking into account the asking price a fresh MoT would be appropriate. May 2016 is not far away.

  7. #7
    Registered User Blue Flash's Avatar
    Join Date
    May 2006
    Location
    W.Yorkshire
    Posts
    1,922

    Default

    Pictures as promised,plus a few images of the Yorkshire moors with rare beast captured in the foreground!.
    Last edited by Blue Flash; 27-02-2016 at 05:36 PM.

  8. #8
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,259

    Default

    Thanks Paul, uploaded to here for those who can't view the images on the forum.

    http://s1290.photobucket.com/user/Tw...w/Blue%20Flash

    Nich.
    Last edited by Nich; 25-02-2016 at 07:17 PM.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  9. #9
    Registered User Blue Flash's Avatar
    Join Date
    May 2006
    Location
    W.Yorkshire
    Posts
    1,922

    Default

    Not a sniff!,I think that a full MOT is in order and a reduction in price then onto Pistonheads for a wider audience coverage.

  10. #10
    Registered User Blue Flash's Avatar
    Join Date
    May 2006
    Location
    W.Yorkshire
    Posts
    1,922

    Default

    The car now is MOT'd till FEB 2017 AND NO ADVISORIES.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •