Shock absorbers / diff / rear brake shoes
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Shock absorbers / diff / rear brake shoes

  1. #1
    Registered User guymaathuis's Avatar
    Join Date
    Oct 2010
    Location
    Merscheid / Luxembourg
    Posts
    52

    Default Shock absorbers / diff / rear brake shoes

    Hi,

    I think my '04 ZTT 260 needs an overhaul. The steering wheel shakes when braking, because of the play in the front shock absorbers. I read in the forum, that they are special to the 260 and were hard to find. Are they now easier available somewhere? Are these really the best price: http://www.allcarpartsfast.co.uk/mg-...ront-75-zt-v8/

    Also the rear brake shoes for the handbrake are worn out and I would need a pair of those Galfer 520. Is there an alternative? As the rear brake pads are the same as the front one of an Elise, were those Galfer 520 also used on other cars? What about these:http://www.dmgrs.co.uk/products/copy...-and-sfp000040

    My differential has been noisy since the buying the car second hand in 2009, but now I hardly hear the radio any more. Do you really need a specialist like John Reid (+447799117211) to put new bearings?
    Current president of the M.G. Car Club Luxembourg and owner of ZTT260 #720, MGBV8, Rover 827, Maestro 2.0, '70 MGBGT, MGA MKII and MG PB 1936

  2. #2
    Registered User
    Join Date
    Oct 2010
    Location
    Haremoss, Fortrie, Turriff, Aberdeenshire Scotland
    Posts
    850

    Default

    Shock absorbers should not cause wheel shake I would image you just need brake discs & pads on the front. The rear can be skimmed with new pads.
    The diff not sure about but some one advise unfortunatly I gav my old one to another member but you might be lucky and some one will have a spare used one but failing that a rebuild is probably a cost effective solution and will be as good or better than standard.

    Ian
    Ian Walters

    Defender 110 6.2 V8
    Mercedes C220 saloon
    Mercedes C320 Estate (AMG body kit)
    BMW R1200 GS Adventure
    BMW K1


    Haremoss, Fortrie, Aberdeenshire Scotland

  3. #3
    Ex-Admin, RIP Herman's Avatar
    Join Date
    Jun 2007
    Location
    Swindon, , United Kingdom.
    Posts
    7,132
    Last edited by Herman; 23-05-2015 at 09:25 PM.
    Fear keeps you alive. Fearless gets you killed

    Herman

    Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)

    FJ1200, DynoJet Stage 1, K&N filter

    Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.

  4. #4
    Registered User guymaathuis's Avatar
    Join Date
    Oct 2010
    Location
    Merscheid / Luxembourg
    Posts
    52

    Default

    I changed the front disks (EBC slotted & grooved) and the front arm rear bushes (Powerflex) Ian W. The only play I keep in my front suspension is in the shock absorber. So is £235.37 (each side) really the best price? http://www.allcarpartsfast.co.uk/mg-...ront-75-zt-v8/

    Last edited by guymaathuis; 25-05-2015 at 09:07 AM.
    Current president of the M.G. Car Club Luxembourg and owner of ZTT260 #720, MGBV8, Rover 827, Maestro 2.0, '70 MGBGT, MGA MKII and MG PB 1936

  5. #5
    Registered User guymaathuis's Avatar
    Join Date
    Oct 2010
    Location
    Merscheid / Luxembourg
    Posts
    52

    Default

    Thank you for the tip, Herman. Did they do a 260-diff before?
    Current president of the M.G. Car Club Luxembourg and owner of ZTT260 #720, MGBV8, Rover 827, Maestro 2.0, '70 MGBGT, MGA MKII and MG PB 1936

  6. #6
    Shot Silk & Supercharged
    Join Date
    Feb 2008
    Location
    Aberdeenshire
    Posts
    2,593

    Default

    Quote Originally Posted by guymaathuis View Post
    I changed the front disks (EBC slotted & grooved) and the front arm rear bushes (Powerflex) Ian W. The only play I keep in my front suspension is in the shock absorber. So is £235.37 (each side) really the best price? http://www.allcarpartsfast.co.uk/mg-...ront-75-zt-v8/

    I had a steering shake that took ages to diagnose turned out to be the bush at the elbow of the front arm. New arm required to fix.

    Get under the car while someone turns the wheel back and forth and you should see where the play is.

  7. #7
    Odyssey Blue Mk1 Vin 075
    Join Date
    Nov 2009
    Location
    Colchester
    Posts
    1,082

    Default

    Not shure that allcarpartsfast can actually supply the front or rear shock assemblies. The zt has a harder ride than the 75 version so part numbers should differ . If they can supply theres a number of people that could do with a pair including myself...

    Ken Bischoff Vin 075.

  8. #8
    Ex-Admin, RIP Herman's Avatar
    Join Date
    Jun 2007
    Location
    Swindon, , United Kingdom.
    Posts
    7,132

    Default

    Quote Originally Posted by guymaathuis View Post
    Thank you for the tip, Herman. Did they do a 260-diff before?
    Not sure, but in the end, a diff is a diff, so if they know what they're doing they should be able to get it sorted
    Fear keeps you alive. Fearless gets you killed

    Herman

    Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)

    FJ1200, DynoJet Stage 1, K&N filter

    Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.

  9. #9
    Registered User guymaathuis's Avatar
    Join Date
    Oct 2010
    Location
    Merscheid / Luxembourg
    Posts
    52

    Default

    @ksilver, I changed the the front arm rear bushes (Powerflex): http://www.ebay.co.uk/itm/MG-ZT-Powe...item5653cf7d48
    Last edited by guymaathuis; 26-05-2015 at 10:22 AM.
    Current president of the M.G. Car Club Luxembourg and owner of ZTT260 #720, MGBV8, Rover 827, Maestro 2.0, '70 MGBGT, MGA MKII and MG PB 1936

  10. #10
    Registered User guymaathuis's Avatar
    Join Date
    Oct 2010
    Location
    Merscheid / Luxembourg
    Posts
    52

    Default

    Although those shock absorbers are advertised at several places (All Car Parts Fast, South Lakeland Mini Centre...) they aren't on stock. I'm now communicating with Mr Jan Fork of Bilstein in Germany, and he promised me to send me soon a price for the production of new RNB001080 (F4-VE3-5177-TO). So if anybody would be interested in a pair, please let me know.
    Current president of the M.G. Car Club Luxembourg and owner of ZTT260 #720, MGBV8, Rover 827, Maestro 2.0, '70 MGBGT, MGA MKII and MG PB 1936

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •