Rover 75V8 Anti Lock Brake Modulator
Results 1 to 5 of 5

Thread: Rover 75V8 Anti Lock Brake Modulator

  1. #1
    Registered User RoverP5BCoupe's Avatar
    Join Date
    Oct 2014
    Location
    Perth, Western Australia
    Posts
    34

    Default Rover 75V8 Anti Lock Brake Modulator

    Hi there, does anyone know where I can purchase a ABS Modulator for my 75V8 please? or recommend a repairer if this is an option. The V6 ones are different, I know I've tried fitting one. Mine shows ABS and Traction Control warning lights even after ABS front sensors replaced. Fault appears to be in modulator and as such a small number made I can't find one Rimmers has none, any help appreciated please.

    Kind regards Mark

  2. #2
    #242 V8 on tour colintf's Avatar
    Join Date
    Jul 2007
    Location
    Bristol / or back home in Cornwall, United Kingdom.
    Posts
    17,906

    Default

    Hi and welcome to you down in Australia
    colintf
    Colin Murrell
    vin 00242 - Probably the only 260 to have driven the full Le Mans circuit?
    MG Car Club Z Register V8 ZT/ZTT Rep.
    MG Car Club V8 Register V8 ZT/ZTT Rep
    MG Car Club MGF Register Regional Rep for Devon & Cornwall and Cotswold Regions.
    MG Car Club MGF Register International Liaison Representative

    http://www.mgfim.org/

    http://www.two-sixties.com/main.htm

    http://www.v8register.net/

    http://www.mgfregister.org/

    http://www.racethemg.com/ http://www.triple-mracing.com/



    Member of MGCC (UK), MGOC, VSCC & TSSC (Triumph Sports Six Club)

  3. #3
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,262

    Default

    Quote Originally Posted by Herman View Post
    Bosch number is : 0 265 223 006

    Strangely enough for a BMW E39 it's : 0 265 223 001
    From David (Greeners)
    From: "Sinspeed Support" <support@sinspeed.co.uk>
    Date: 14 October 2014 15:24:09 BST
    To: <davidgreenfield@totalise.co.uk>
    Subject: RE: Bosch 5.7 ABS Module
    Reply-To: <support@sinspeed.co.uk>
    Hello David

    Thank you for your enquiry,

    We can fully Test + Repair the ABS Pump Module and the estimated cost of repairs will be £150 - £250 +Vat. Our current turnaround time is 3-5 working days and all repaired units are returned with our Lifetime warranty and will not require coding when refitting to the vehicle.

    When sending a unit to us, please also send to our workshop address below.

    SINSPEED LTD
    Unit 5 Brookmarsh Industrial Estate
    70 Norman Road, Greenwich
    London, SE10 9QE

    Put a note with the unit stating your full name, return address and contact number as well as vehicles details (make/model/year and vehicle registration) along with a brief description of the fault and any fault codes you might have.

    If you have any further queries, please do come back to me.

    Kindest Regards

    Jay
    Support Team
    SINSPEED LTD
    T: 0844 847 9999

    --
    We've just launched our NEW Sinspeed Forum and would love it if you could join us:
    http://www.sinspeed.co.uk/forum - It takes just 1 minute to join, literally

    On a side note, if you get a chance, head over to our facebook fan page here:
    http://www.facebook.com/sinspeed - Like us on Facebook & We'll Love You Forever!
    These two posts may help Mark, there was a post regading someone in NZ who may be able to help. I will find it and let you know. Oh, and welcome along, what are the last three digits of your VIN? Any photos..

    Found this post from Terry who is in Christchurch, New Zealand, posted on 10/10/2014:

    Quote Originally Posted by re5rotary View Post
    Hi sorry I haven't been on here for a few days so only just seen this. I was the lucky one that started this thread. I can confirm that a R75 unit (the electrical part) with traction control will bolt up to the V8 hydraulic part and assuming that unit is OK will get the ABS light out, but the traction control will show a fault and not work. The traction control works totally different between the V6 and V8 units. I have had 2 units successfully repaired here in NZ so if no one in Europe wants to do it I would happily co ordinate repairs here if anyone wanted to send me their unit. regards Terry
    If you return your questionnaire to Tim and get full access then there are quite a few posts on this topic and some useful information.



    Nich.
    Last edited by Nich; 27-10-2014 at 09:58 AM.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  4. #4
    Registered User RoverP5BCoupe's Avatar
    Join Date
    Oct 2014
    Location
    Perth, Western Australia
    Posts
    34

    Default

    Thanks very much gents, this is really helpful, I'll reply to questionnaire with details of my car as requested, still at work but will do before I go tonight. I think I'll get in touch with the lad in NZ sounds good for a repair job.

    Thanks again Mark

  5. #5
    Administrator Tim's Avatar
    Join Date
    Mar 2006
    Location
    Surrey, United Kingdom.
    Posts
    9,490

    Default

    Also welcome to greenness Mark
    Tim Hayton

    Some men see things as they are and say why - I dream things that never were and say why not.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •