ZT260 Front & Rear Dampers, front lower control arms, front hubs all For Sale
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: ZT260 Front & Rear Dampers, front lower control arms, front hubs all For Sale

  1. #1
    Registered User
    Join Date
    Jul 2006
    Location
    Bucks, United Kingdom
    Posts
    499

    Default ZT260 Front & Rear Dampers, front lower control arms, front hubs all For Sale

    I would like to sell these items together, as a job lot.

    I had kept them as spares having bought them from a 22k mile car that was broken, probably at least 5+ years ago.

    Pair of front strut/spring/damper assemblies

    Pair of rear dampers (saloon)

    Pair of front lower control arms, with bushes

    Pair of front hubs


    I am asking £600ono for the lot. Collection from Amersham, Bucks, HP6 please.

    Oh, and I will also include a new exhaust "Y-section" too.

    Please PM me if you are interested.

    Thanks,
    Martin
    Attached Images Attached Images

  2. #2
    Registered User
    Join Date
    Jan 2009
    Posts
    643

    Default

    If you decide to split Martin, I'd go for the front hubs...

    Might be easier to sell separately..

    But feel free to drop me a message if you change your mind.

  3. #3
    Ex-Admin, RIP Herman's Avatar
    Join Date
    Jun 2007
    Location
    Swindon, , United Kingdom.
    Posts
    7,132

    Default

    Quote Originally Posted by T16 View Post
    If you decide to split Martin, I'd go for the front hubs...

    Might be easier to sell separately..

    But feel free to drop me a message if you change your mind.
    And I'll have a think about the front shocks, although they look a bit grubby

    But then again they came from Pilsdon..................
    Last edited by Herman; 16-01-2015 at 11:20 PM.
    Fear keeps you alive. Fearless gets you killed

    Herman

    Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)

    FJ1200, DynoJet Stage 1, K&N filter

    Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.

  4. #4
    Ex-Mod, RIP
    Join Date
    May 2006
    Location
    Exeter
    Posts
    10,696

    Default

    Quote Originally Posted by Herman View Post
    And I'll have a think about the front shocks, although they look a bit grubby
    .................
    As long as there is not rust, A bit of paint
    ZTT400 SHM Pearl Black #519 "Super Brick"
    ZTT260 Starlight Silver #428
    ZS180 x 3: 2 x Trophy Blue Hatchbacks, 1 x Le Mans Green 4 door. (Loads of ZS bits For Sale)
    ZR160 3 door XPG, Road Racer, "Rabbit" FOR SALE
    Triumph Bikes x 2. 1999 Speed Triple, 2011 Street Triple

  5. #5
    Registered User
    Join Date
    Jan 2009
    Posts
    643

    Default

    They are a bit!!

    My cars on 52k, and the shocks look like they have just come out the factory!

    Well thats unfair, the entire underside of the car looks like it just came out the factory.

    Ive seen some PROPER nasty undersides on 260's...... Not sure how they corrode so badly.

    Must be the Scottish air!


  6. #6
    Registered User
    Join Date
    Jul 2006
    Location
    Bucks, United Kingdom
    Posts
    499

    Default

    As you have observed, I was too lazy to clean them! 5 minutes would have them looking pretty good, with no rust. For some reason the chaps at Pilsdon gave each part a short blast of rust-coloured paint from a spray can.

    I may well end up selling items separately on here or Ebay, so do let me know if individual parts are of interest and how much you'd be happy to pay.

  7. #7
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,259

    Default

    Think we need some guideline prices Martin.

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  8. #8
    Ex-Admin, RIP Herman's Avatar
    Join Date
    Jun 2007
    Location
    Swindon, , United Kingdom.
    Posts
    7,132

    Default

    Quote Originally Posted by Nich View Post
    Think we need some guideline prices Martin.

    Nich.
    I agree with Nich on this Martin.

    If you're willing to sell separately you do need to state the price for the individual items.

    I'm interested in the front shock assembly but can't state what I'm willing to pay ( being a mod and all that)

    So in the interest of fairness, if you want to sell separate items, please state a price for the individual parts.

    Thanks.
    Fear keeps you alive. Fearless gets you killed

    Herman

    Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)

    FJ1200, DynoJet Stage 1, K&N filter

    Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.

  9. #9
    Registered User
    Join Date
    Jul 2006
    Location
    Bucks, United Kingdom
    Posts
    499

    Default

    Hi guys,

    OK. Everyone seems to want individual prices so here goes, with some new photographs of the parts cleaned up!

    Pair of front dampers £275 - SOLD

    Pair of rear dampers £175 - SOLD

    Pair of front hubs £100

    Pair of front lower control arms, with bushes £100

    New exhaust Y-section (only) £50 - SOLD

    The offer to sell everything together (my preference) for £600ono still exists.

    All for collection from Amersham, Bucks, HP6.

    Let me know!
    Attached Images Attached Images
    Last edited by Nich; 22-01-2015 at 10:51 AM. Reason: Correction to description

  10. #10
    Registered User anthony27's Avatar
    Join Date
    Aug 2007
    Location
    Lausanne, Switzerland
    Posts
    499

    Default

    Martin. you have a PM.
    MG ZT-T 260 in X-power grey, n° 555, LHD
    MG TF 160 BRG, LHD
    Lotus Evora 2010 Platinum silver LHD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •