Origins
Results 1 to 7 of 7

Thread: Origins

  1. #1
    Registered User
    Join Date
    Apr 2011
    Location
    Polmont nr Falkirk
    Posts
    46

    Default Origins

    Got v8 con SE direct from factory. 2004.
    This car was apparently the sales directors car.
    My mechanic say,s on replacing suspension springs front, the spec parts from Rimmer do not look right.
    Anybody know anyone who could shed some light, sales directors name, members of project team type of parts fitted to this car chassis no SARRXZLGJ5D000634, suspension code front is QR, or Eibach, spring manufacturer.
    Please contact on 07834987644

    Ta Jon Dee

  2. #2
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,259

    Default

    Surprised you haven't become a full member John, if you return your questionnaire to Tim and become a full member all of the information on the site will be available to you.

    How did you get on with the alternator problems?

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  3. #3
    Registered User
    Join Date
    Apr 2011
    Location
    Polmont nr Falkirk
    Posts
    46

    Default

    Nich

    Was under the impression i was a full member, had a few problems with passwords.
    Regards
    Jon Dee

  4. #4
    Registered User
    Join Date
    Apr 2011
    Location
    Polmont nr Falkirk
    Posts
    46

    Default

    Nich

    Alternator resolved, got new replacement from Dreadnought

  5. #5
    Administrator Nich's Avatar
    Join Date
    May 2006
    Location
    Surrey, United Kingdom.
    Posts
    10,259

    Default

    No, no, no John. You only have access to a very limited section of the forum. If you return your questionnaire to Tim you will be able to become a full member with access to the whole site. If you need another copy then PM Tim and he will send you another.

    Nich.
    Nicholas John Peter Tinker - # 484

    Manufactured on Tuesday 27th April 2004 @ 12.17.47.
    Commission Number: 24468.
    Brochure Model: M3 Tourer 4.6 V8 260PS.
    Specification Code: L01B.
    CICode: D1511.
    Trim Level: TL8.9 (M3).

    65th ZT-T 260SE to be made out of 115.
    11th ZT-T 260 SE in Pearl Black (PBT) out of 23 produced.

    Manufactured in the UK by MG Rover Group Ltd.


  6. #6
    #242 V8 on tour colintf's Avatar
    Join Date
    Jul 2007
    Location
    Bristol / or back home in Cornwall, United Kingdom.
    Posts
    17,904

    Default

    It's so well worth doing John
    colintf
    Colin Murrell
    vin 00242 - Probably the only 260 to have driven the full Le Mans circuit?
    MG Car Club Z Register V8 ZT/ZTT Rep.
    MG Car Club V8 Register V8 ZT/ZTT Rep
    MG Car Club MGF Register Regional Rep for Devon & Cornwall and Cotswold Regions.
    MG Car Club MGF Register International Liaison Representative

    http://www.mgfim.org/

    http://www.two-sixties.com/main.htm

    http://www.v8register.net/

    http://www.mgfregister.org/

    http://www.racethemg.com/ http://www.triple-mracing.com/



    Member of MGCC (UK), MGOC, VSCC & TSSC (Triumph Sports Six Club)

  7. #7
    Registered User chrissyboy's Avatar
    Join Date
    Apr 2009
    Posts
    166

    Default

    Quote Originally Posted by dixiejon View Post
    Got v8 con SE direct from factory. 2004.
    This car was apparently the sales directors car.
    My mechanic say,s on replacing suspension springs front, the spec parts from Rimmer do not look right.
    Anybody know anyone who could shed some light, sales directors name, members of project team type of parts fitted to this car chassis no SARRXZLGJ5D000634, suspension code front is QR, or Eibach, spring manufacturer.
    Please contact on 07834987644

    Ta Jon Dee
    Hi Jon,
    Is your car a Rover 75 V8? or a ZT 260? the springs you purchased from Rimmer Bros will be for a ZT 260 as they are no longer available for Rover 75. However if you are stuck I have a pair of new front springs for Rover 75 V8 which have a slightly higher ride height than the ZT.
    Regards
    Chris

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •