Bonnet wont Open
Hope someone can help me, Bonnet on my V8 will not open, the bonnet catch has become floppy when pulled, the cable is still attached so I don't think it is broken, I have looked at my ZTT 190 as a comparison to see if it is anything obvious, but no luck, very frustrating!
I think this is a know 'issue' (if not common) on our cars. I dont know the solution, but am sure someone who does will be along shortly....
Last edited by Flying Silver; 19-03-2012 at 03:39 PM. Reason: typo / spelling?!?
But not in the public section please.Originally Posted by Flying Silver
Please PM Tim or ColinE if you need more information
Fear keeps you alive. Fearless gets you killed
Herman
Vin#076 pics, Black, modified and with 234 RWHP and 276 lb/ft (275 BHP and 440 Nm @ flywheel)
FJ1200, DynoJet Stage 1, K&N filter
Alfa MiTo 1.4 Cloverleaf, 170 BHP, Alfa Rosso.
E-mail sent Mike
Tim Hayton
Some men see things as they are and say why - I dream things that never were and say why not.
Hi there,
I've been there three times with both my ZT260 and the ZT-T190. If you have not got it fixed with the above 'PM's then let me know and I'll give you some directions on how to get the bonnet open and how to cure the problem. It all relates to the crap arrangements MG/Rover used two connect one cable to two!
Regards
Big Frank.
Posting Permissions
Reply With Quote