Seeking a wiring diagram for the ZT260 2004 Model please...

Hi All. I am a new member - as of today.
My 260 air con/rad fan motor was burnt out, so my garage bought a new fan kit from Wales and fitted it, but after plugging it in, it won't switch on. The 3 relays in the control box were replaced with the fan. Our auto elec won't look at it until he has a wiring diagram. The internet has many ZT wiring diagrams but I cannot find one for the 260 that deals specifically with the cooling/air con system.
I will gladly look in the archive section if someone has had this problem before. The resister fix - silver for gold - came with the new fan.
Many thanks, in advance.
Dave

Hi Dave, welcome along. If you get your questionnaire back to Tim you will get full membership and access to the whole site. What are the last three digits of your VIN? Whereabouts are you located?

If you PM me your email address I will see what I can find.

Nich.

Welcome along Dave

Its common and jules on the other forum is your man!

Quote:

---

Originally Posted by gignwah11

Its common and jules on the other forum is your man!

---

Jules is a member on here Alan but even he hasn't been able to solve a lot of the problems members have with fan replacements.

Dave (murphgod) hasn't been on the forum since his post so it can't be that urgent.

Nich.

I had assumed as he said from wales and that he had the resistor etc as well, that he had gotten it from Jules?? who sends full instructions with his fans?

But as I've been off the grid a bit lately reguarding the 260, I wasn't aware there had been issues Jules hadn't sorted..

Quote:

---

Originally Posted by NOCTURNAL

I had assumed as he said from wales and that he had the resistor etc as well, that he had gotten it from Jules?? who sends full instructions with his fans?

But as I've been off the grid a bit lately reguarding the 260, I wasn't aware there had been issues Jules hadn't sorted..

---

Try this link Nick, post number 5 from October last year.

https://www.two-sixties.co.uk/mgoc26...286#post172286

New fan fitted but fan runs at high speed all of the time. I spoke to Jules who could only suggest that the gateway ECU was at fault which still seems to me to be a bit drastic, no other suggestions. PeterV8 had the same problem but he changed the wiring of the relays and managed to solve the problem, a 'fix' which Jules is now providing with his instructions. The instructions themselves are a bit generic (some do, some don't) and although contain details of the 260 fitting, are not very specific. I am still waiting to sort the problem with an electrician, hopefully some time this month.

Jules offers a great service in supplying hard to source parts at a reasonable price but I haven't experienced a very good after sales service. :)

Nich.

Hi Guys
Apologies - my ZT has been on the hoist at work for far too long with this problem, but I have a mired of other problems to sort out and "forgot" to come back to the thread:p. (a utility fell off a hoist last week - not a good sight - no-one injured, thankfully!).
Anyway, my electrician says he will give the repair a go, but seriously requires a wiring diagram to know where to start his trace... Another electrician up the road won't even entertain the thought of looking for the fault!

Quote:

---

Originally Posted by murphgod

Hi Guys
Apologies - my ZT has been on the hoist at work for far too long with this problem, but I have a mired of other problems to sort out and "forgot" to come back to the thread:p. (a utility fell off a hoist last week - not a good sight - no-one injured, thankfully!).
Anyway, my electrician says he will give the repair a go, but seriously requires a wiring diagram to know where to start his trace... Another electrician up the road won't even entertain the thought of looking for the fault!

---

Ref post #2 if you PM me your email address I can let you have the wiring diagram.

Nich.

The new fan with gold resistor has been fitted but we don't have a power source - the previous fan was deemed to be faulty but was probably perfect - just that the power to it had failed and we "assumed" that the fan was at fault.
Hence the need for a wiring diagram to locate the correct power source.
Hope this helps? Did the original workshop manual have a wiring diagram in it? I didn't get such a manual with the car, if one actually exists...

Nich - It is murphgod@hotmail.com

Many thanks!

You did not reply to my PM ???

Got all the manuals for all the ZEds.

C.

cheers Nich,

I suspect you are sorted now Murph, but yes the wiring diagrams are available :)