Iron X

Used some IronX for the first time today. The wheels on my grand Cherokee are heavily coated in brake dust, the inside is seriously baked on too but ironx makes light work of getting rid of the brake dust.

The iron x when sprayed on turns blood red when loosening and dissolving iron particles.

Best effect is to clean your wheels as normal then spray iron x on and see that what is missed.

Its also safe to use on paint work after claying to remove the unseen paint containments.

No photos i'm afraid but Google is your friend, well worth purchase.

Thanks for that Peter, i got some bad brake dust bits on my alloys will give it a try before her MOT wash and wax :)

You'll be amazed at the results, oh just don't take too deep a breath of it :vomit:vomit:vomit:vomit:vomit

another good tip Peter - must try it on the ZS wheels - many thanks :thumb

Thanks Peter. I've been on the lookout for a potent wheel cleaner for some of the neglected cars I clean at my friends garage, I'll give it a try. I use the Bilberry wheel cleaner on my own cars which I have found to be very good as well.

Take a look here

http://www.the75andztclub.co.uk/foru...ghlight=Iron-x

Billberry is very good stuff that i use for normal cleaning of the wheels, but together with iron x afterwards get all the bits that billberry can't.

Impressive!

Bake oven cleaner spray does the same - not so fast but not so expensive

very quick test run on one of the mini wheels, which are absolutely baked on
ave them a quick rinse, sprayed it on, left it, agitated it a bit and washed it off. a little bit left in the corners but it will clay off. bloody astounding note the attachments are in reverse order !!

Quote:

---

Originally Posted by black olive

very quick test run on one of the mini wheels, which are absolutely baked on
ave them a quick rinse, sprayed it on, left it, agitated it a bit and washed it off. a little bit left in the corners but it will clay off. bloody astounding

---

They seem to have got worse for the cleaning!!!

ho ho ho