A short video of the Two-Sixties arriving in convoy and a quick view around their area.
https://www.youtube.com/watch?v=L8l12Bm9-GI
Printable View
A short video of the Two-Sixties arriving in convoy and a quick view around their area.
https://www.youtube.com/watch?v=L8l12Bm9-GI
Really good. Thanks for that !Quote:
Originally Posted by jimbo
David
Presumably the 260s were parking behind the cameraman, at the point where David drives past you can hear a metallic scraping sound probably from the car parking behind out of shot. This is caused by a thick corrosion build up between the clutch bell housing and the thin engine back plate behind the sump area, this distorts the back plate and bends it towards the rear of the flywheel to the point of skimming it. When the clutch is depressed the natural end float in the crankshaft allows the flywheel to rub on the engine back plate causing the scraping noise. This can be remedied by removing the two lower back plate bolts and scraping off the corrosion from the clutch bell housing and gently shaping the back plate for clearance before refitting the bolts...
Thank God for that info, Nick. I thought it was either my 'Olive', or more likely the lovely Tourer from the IoM behind me.
As far as I know, neither have gone trans-gender and sprouted clutches!
David
I've added it to the Video section of the Gallery Jim, many thanks.Quote:
Originally Posted by jimbo
Nich.
Many thanks David, pleased to hear you enjoyed it.Quote:
Originally Posted by David
Thanks Nich.Quote:
Originally Posted by Nich