On the V8 the average and instant fuel consumption read outs are disabled on the trip computer - does anyone out there know if there's a way to re-enable?
Thanks!
Printable View
On the V8 the average and instant fuel consumption read outs are disabled on the trip computer - does anyone out there know if there's a way to re-enable?
Thanks!
As far as I know, there is none
It was deemed too difficult to get the gateway ECU to process this data between the Ford and Rover/BMW ECU's thus it was never implemented
We do get the digital Speedo instead though :)
Electronic speedo is nice, but I have yet to work out how to tell the traction control warning light to bugger off (it is permanently off) so defaults back to the warning panel after a few seconds.
the majority of the time I don't have aproblem either, but there are a few places , and two in particular within 2 miles of my home, that when pulling out into a 2 lane roundabout, the camber changes in two directions, and you effectively drop into a bowl, whilst turning across the side of the bowl.
they are both roundabouts that require very Posative pull away unless there is no traffic at all, and these camber changes mean the rear goes light, particularly on one side I assume.
I still forget at times, and having lurched to a near standstill in front of oncomming traffic, have perfected the power-off featherback-on-whilstreaching for the button with the other hand ROFL