Originally Posted by
ColinE
Oh and wash out the washer bottle also, check for fouling cables, fit the second horn if you have one
In fact here's the complete list
Stainless mesh,
Indicator bulbs - change to Silvertec bulbs that so not show orange through the lens,
Washer bottle - clean,
Stainless bolts/screws - ones for the bottom of the bumper available from club shop,
Second horn,
Improve bumper/bonnet/wing gap,
Clean replace air filter
Fan resistor (depending on fan type)
Check for rubbing cables
Bonnet pull modification
Strip and regrease the bonnet catch receptacles
It's also worth checking that the ballast units behind the (xenon) headlamps are secure. They have been known to work free which leaves you with no light. They are expensive parts if you have to replace one and very hard to come by, so definitely worth checking